PDA

View Full Version : Gu pillar pod


Davesgu
3rd June 2013, 07:44 PM
How good are these pillar pods from 4x4concepts on eBay. Well worth the cost (made the mistake of buying a cheap one first)

29945
meh
3rd June 2013, 09:38 PM
they are quite good. I was going for the 4 in the middle of the dash but went for this one instead
Tonks
3rd June 2013, 10:07 PM
Are they easy to install
MEGOMONSTER
3rd June 2013, 10:10 PM
Here's mine went with Autron.
29947
29948
healy
3rd June 2013, 10:19 PM
Are they easy to install

Yeah it's just two bolts and pops out
Davesgu
4th June 2013, 12:08 AM
Does anyone know if the standard exhausts have a threaded section to screw the EGT sensor straight in to it?

I plan on getting a 3' exhaust system down the track when funds permit but for the mean time will be running the stock set up.
MudRunnerTD
4th June 2013, 12:24 AM
Does anyone know if the standard exhausts have a threaded section to screw the EGT sensor straight in to it?

I plan on getting a 3' exhaust system down the track when funds permit but for the mean time will be running the stock set up.

Stick your head under the bonnet mate, you will be able to see it quite clearly ;)
Davesgu
4th June 2013, 12:27 AM
Lol thanks mud runner I've had a good look around and haven't spotted a place for it yet. I was thinking it may be under the heat shield or something and thought I'd try the lazy way of finding out ;) ask everyone else first haha
NP99
4th June 2013, 12:27 AM
Here's mine went with Autron.
29947
29948

Nice....a few $ tied up there :)
MEGOMONSTER
4th June 2013, 06:11 AM
Nice....a few $ tied up there :)

Just a few.
Tonks
4th June 2013, 07:06 AM
I'am thinking about installing some gauges on my 4.2 TDi,

What ones do i really need ?

What brand do you reccommend,

Thx.
benno77gu
4th June 2013, 07:28 AM
hi NP99 are you happy with the autron gauges
rochjas
6th June 2013, 02:34 PM
Does anyone know if the standard exhausts have a threaded section to screw the EGT sensor straight in to it?

I plan on getting a 3' exhaust system down the track when funds permit but for the mean time will be running the stock set up.



Did you find it... I am about to do the same thing?? and yes when funds permit I'll be doing the 3" thing too...
Davesgu
6th June 2013, 10:22 PM
Have had a good look around and from what I've read on the net the GU ZD30's don't come standard with a threaded section :( so for now it'll be pulling the cat out and getting a bit welded in.