mq 5 speed

[wankel]

so ive put my engine and gearbox back together and have realised ive lost the pushrod to the clutch fork.
i have one off a 4sp slave but it looks like the 5speed one needs to be much longer.
can anybody confirm the length of the pushrod and please post up a picture of how the rod sits in the fork itself as i have lost whatever sits in that hole.

cheers

[janderson]

so ive put my engine and gearbox back together and have realised ive lost the pushrod to the clutch fork.
i have one off a 4sp slave but it looks like the 5speed one needs to be much longer.
can anybody confirm the length of the pushrod and please post up a picture of how the rod sits in the fork itself as i have lost whatever sits in that hole.

cheers

Both my old G60 & MQ I replaced with a home made one. Old screwdriver, Just cut to size.

[wankel]

yeh ive cut and rounded a piece to fit in terms of length. any idea of what sits in the hole on the fork as the rod would just pass straight through. i was trying to avoid welding a washer into the hole but i guess i shouldnt have lost the original stopper...

[janderson]

I welded a nut to it. Never had any problems. With both trucks I think I used them for over 10 years.

[wankel]

yeh ive done exactly that. screwdriver worked a treat. cheers mate