View Full Version : Torque settings
Stokezi
20th April 2013, 04:32 PM
Hi need torque settings for injector hold down bolt 12ml for a zd30 gu 3
cheers
threedogs
20th April 2013, 05:52 PM
I can't find any torque settings in Ellery manual
Stokezi
20th April 2013, 08:32 PM
does anyone know if 120lbs sounds correct
threedogs
20th April 2013, 08:49 PM
Re read the whole article no reference whats so ever, Sorry bout that
jgoose
20th April 2013, 08:56 PM
Hi what size is the bolt/stud??
jgoose
20th April 2013, 09:01 PM
If its an 8mm bolt /stud it should be 27nm or 20ftlbs
Stokezi
20th April 2013, 09:19 PM
12ml injector hold down bolt
If its an 8mm bolt /stud it should be 27nm or 20ftlbs
jgoose
21st April 2013, 07:25 PM
95nm 70ftlbs going by my specs on bolts
jgoose
21st April 2013, 07:28 PM
95nm. 70ftlbs
Stokezi
21st April 2013, 08:34 PM
can you tell me where you came across the specs cheers
95nm. 70ftlbs
jgoose
21st April 2013, 08:41 PM
Ive got a book that i have used since i was an apprentice that has all bolt specs etc i dont rely on manufactures specs as ive found that sometimes the bolts/studs will stretch or damage the threads so all motors pumps etc that i rebuild i use the book for all the bolt tensions & have never had any failers
Strugs
31st July 2014, 03:32 PM
Hi guys. I have a 2003 GUIII / Y61, 3L, 4CYL, manual, turbo diesel Patrol. Would anyone here know the 5 step torque settings for my harmonic balancer? Needs replacing.. Cheers
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.