PDA

View Full Version : Calling All GQ RB30 Owners!!!



Dragon
13th April 2013, 02:50 PM
Im in desperate need of someone with a GQ with a RB30 motor in it.
I need someone to take some pics of the vacuum hoses around the carby or if anyone has a vacuum diagram.
Or if anyone is near Baxter in Vic I could pop over to take some pics.
Thanks, Heath.

Dragon
13th April 2013, 09:25 PM
Come on everyone.
Can no one on here help?
Ive wasted hours on the internet to no avail.

Woof
13th April 2013, 09:38 PM
Sorry Heath, cannot help but hopefully someone will be able too

taslucas
14th April 2013, 07:53 AM
Hey mate, I just contacted a mate that has an rb30 and asked him to get a few pics.
Watch this space

FanTapstic!

mudski
15th April 2013, 09:03 AM
I just did a Google image search on RB30 Vacuum hoses and found heaps of pics. Could try this...

taslucas
15th April 2013, 09:58 AM
Hey mate, I just contacted a mate that has an rb30 and asked him to get a few pics.
Watch this space

FanTapstic!

Well my mate said it would be easier to video it instead of pics. Trouble is he has an early crapple Imoan and apparently they don't video!?
I'll see if I can call in tonight

FanTapstic!

taslucas
15th April 2013, 12:44 PM
Update: his hoses are cut and blocked and a bit messy looking so he didnt bother with pics or vids

FanTapstic!

Dragon
15th April 2013, 09:38 PM
i think ive sorted out the vacuum issue now, BUT...
Now it wont rev past about 2000 rpm, thinking ignition, eg, leads, cap, rotor, dizzy pick up.

GQ TANK
19th April 2013, 09:51 PM
Check you rotar buttn they do have a rev limter

Dragon
20th April 2013, 06:08 PM
Rotor button had a broken spring.
Just replaced the rotor button and now it seems worse.
Do they have any problems with the little module inside the dizzy?

teleman
11th May 2013, 05:51 PM
Carby? Or efi

Gq jack
16th June 2013, 01:06 AM
I have one sitting in my driveway that I was driving today. It is the carby beast. If you still need the pictures, even for future reference, I will take some pictures of the whole engine and you can use if you need them. First thing tomorrow I will post them up. Or today in this case.

mudnut
16th June 2013, 12:30 PM
If yours has a carby, check that the second stage of the carby isn't stuck. Has the engine backfired at all?

mudnut
16th June 2013, 01:05 PM
I have some pics, for a carby
30325
30326
30327

Dragon
18th June 2013, 12:54 AM
A big thanks "mudnut", but in pic 2 where do the missing hoses go?
Cheers

Dragon
18th June 2013, 12:55 AM
A big thanks "mudnut", but in pic 2 where do the missing hoses go?
Cheers

mudnut
18th June 2013, 03:35 PM
They only go to the air filter housing. Top one to the tube furthest to the rear. I think it holds the revs up longer while the carby is cold.