PDA

View Full Version : TX3340 2-way issue.



the godfather
24th March 2013, 09:34 PM
Ok, I think I am in the right section. I fitted a GME TX3340 radio to the Patrol.
It receives beautifully but it transmits poorly. Very weak signal on any receiving radio.
The continuity on the antenna is fine. Its got me stumped.
Can anyone offer a suggestion as to the problem.

TGF

NP99
24th March 2013, 09:37 PM
What about earthing of the antenna! Is that good?

the godfather
24th March 2013, 09:43 PM
It appears OK, wouldn't that stop the reception as well?

NP99
24th March 2013, 09:49 PM
Earth can be a tricky thing. The radio uses more power in transmit. Normally the paint is not scrapped back where the mount sits.

the godfather
24th March 2013, 09:55 PM
I will check that tomorrow and see how I go. Thanks dude.

NP99
24th March 2013, 09:57 PM
I will check that tomorrow and see how I go. Thanks dude.

I'll ask my radio boffins at work tomorrow to check for other causes.

GQ TANK
25th March 2013, 11:55 PM
You need to get someone put a VSWR meter on the antenna - it will confirm if you have a cable . antenna fault of a faulty radio - blown PA.

Most commen causes are
Faulty power cables - cable too small
Faulty rf connector shorted
Faulty cable
Damaged / fauilt antenna
Faulty PA in radio due to above

the godfather
27th March 2013, 12:43 AM
Problem solved. Faulty CAT cable from the unit to the hand piece junction box. Common issue with new radios that have remote faces or everything in the hand piece.