gq floor pan

[bauer]

Gday all what sort of price am I looking at for drivers side footwell cut. Are there any aftermarket cuts? Also any recommendations for vinyl floor for GQ LWB.
Thanks
TB

[Clunk]

Are you handy with a welder? Can you use just a piece of plate steel? Try a bookshop to see what they suggest and how much it would cost. Vinyl flooring can be had off eBay for reasonable coinage

Don't stroke it, TAP it!!!!.....

[bauer]

Thanks Clunk. Me brothers a panel beater and he suggested the same as you.I thought that i would try and get proper pan if I could but probably go with the plate. Ive had a look at the vinyl floor on ebay but wasnt sure what thefit would be like.
Thanks TB

[nikp_7]

I just did my flooring. I used trufit carpets in melbs. New vynil floor. Hardest part was cutting the seat holes after its installed. The underlay gets in the way n binds up yhe bolts. I also used their sound deadedning flooring, pretty good stuff