kwk56pt
8th March 2013, 08:45 PM
The Watchdog TM2 has a orange wire which can be connected to the oil switch to give a audible alarm when the oil light comes on. I have a 2005 TDI 4.2 Patrol. Is there another point to tap into other than the oil switch. I have a 150mm lead from a harness to the oil pressure switch which is not easy to work on. It is covered in solid conduit so I would have to cut that off. I thought there may be a better place in the circuit to splice into so perhaps you could share how you wired yours up or what you have done about a audible oil pressure alarm.
I have the coolant alarm wired up and this works great and I would like the same protection for oil pressure failure
I have the coolant alarm wired up and this works great and I would like the same protection for oil pressure failure