ref wire for Steinbauer CRD

[CorbinsGUte]

hi just a quick one, im fitting my Steinbauer today but need help sorting out the reference wire. where abouts do i join it to the throttle position cable? and im guessing its only one of the 4 wires that go to the maf sensor??
help!
cheers
Sent from my GT-I9100 using Tapatalk 2

[CorbinsGUte]

sorry 5 wires that go into the maf

Sent from my GT-I9100 using Tapatalk 2

[WogsRus]

You need the white with a red line. It can be found at the peddal.

[megatexture]

sorry 5 wires that go into the maf

Sent from my GT-I9100 using Tapatalk 2

One is to go to the maf? That's new then, mine only plugs into the fuel rail ,accelerator, earth and pos

[CorbinsGUte]

i was correcting my op where i said 4 wires. i was refering to the wires on the maf sensor. i just wanted to know which one to tap onto. we having a bit of a go now. so would i attach it near the maf sensor or the pedal?

Sent from my GT-I9100 using Tapatalk 2

[CorbinsGUte]

http://www.nissanpatrol.com.au/forums/images/imported/2013/03/10.jpg

do i join onto any of these? or somewhere else
theres these two plugs under the front of the cooler will they have the tps ?http://www.nissanpatrol.com.au/forums/images/imported/2013/03/11.jpg
thanks heaps

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

Tap in at the pedal( just follow instructions and you will need a multi meter), yes the black plugs in the middle of the pic, can be annoying to get your hands in unless they are lady like lol

[CorbinsGUte]

theres a blue wire that comes out of the pedal reads .7 with accelerater out and 3.7 with it in. dark blue cable. any idea which one out of the wires from them two plugs it is? font really wanna extend the wire into the cabin

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

I can't rember the colour and my back is f<#¥%d ATM so won't be able to look at mine but wogsrus said white with red earlier and from memory he has just recently installed a chip so thow the multi meter on that one and check.

[CorbinsGUte]

ok thanks. theres no white and red wire plugging into the pedal. we got all night suss bottle of rum we will sort it out hopefully. or end up torching the car out of anger one or the other lol

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

Ill see if I can grow a spine and have a look yours is crd I take it ?

[CorbinsGUte]

yeah mate 2008. Dont hurt yaself mate but its all really apprciated its getting frustrating.
cheers

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

I attempted to have a look but it was all to much but I could see the white wire with a red trace and with how the wires were connected and taped up I think that is the one but not 100% with out pulling off all the electrical tape. And you don't have the white with a red trace ?

[CorbinsGUte]

no white and red wire anywhere. we getting good readings off a solid blue wire off the pedal. in the process of hooking it to that one. cheers

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

Might be a ute/wagon thing as mines 08 also but if your getting the right readings from the blue one must be it

[CorbinsGUte]

it might be mate . were having soldering from issues at The moment so we sitting back enJoying a rum watching the thunderstorm hammer us after having 95% humidity all day! i love north qld lol

Sent from my GT-I9100 using Tapatalk 2

[megatexture]

Isn't it amazing theres nothing a few rums can't fix

[CorbinsGUte]

too true. been on a small drive i can notice a bit of a increse in torque. ill change the exhaust asap too

Sent from my GT-I9100 using Tapatalk 2