Jacket's TD42 wagon.

[Jacket_1985]

Bought this around 6months ago. came with:

UHF
31's
ARB bar
IPF spotties
Safari snorkel
ARB Scrub rails
2in tough dog lift. . . . . . .

what can i do to it to make it better??? remember i'm a "beginner", i drive it daily, and take it offroad whenever i can. I go camping, fishing, shooting every week in it. i also drive it for work.

[MudRunnerTD]

You can whack some 37s on Walker Evans Bead Locks. SS Snorkel I reckon. At least a 4" lift with maybe Drop arms? I can't say I have seen your thread on P4x4 but I bet it looks nothing like those pics now....

[Jacket_1985]

You can whack some 37s on Walker Evans Bead Locks. SS Snorkel I reckon. At least a 4" lift with maybe Drop arms? I can't say I have seen your thread on P4x4 but I bet it looks nothing like those pics now....

OK, anyone who knows where this thread is going can thank me now. LOL.

[Jacket_1985]

So i needed to transfer rego to vic. . . . which means a RWC.
Few bits to fix, but nothing major. Last pic is in my driveway, that's how it looked the day before being reg'd in vic.

[MudRunnerTD]

OK, anyone who knows where this thread is going can thank me now. LOL.

Bhhhaaaaa! Ah sorry Jacket. Popped the baloon. Do your thing mate, I have not seen your white one but have seen a number of your high quality buildups with keen interest and admiration. A bit of envy thrown in there to on occasion.

I remember when you posted pics of a decommissioned Winch Challenge truck you found basically in a paddock!!! Walker Evans and all!! All I could say was "Lucky Lucky Bastard!!"

Can't wait to see this one bud. Post away.

[Jacket_1985]

So a week or so later most of the parts for a better lift kit had arrived.
And a front ARB airlocker. and a diff rebuild kit.

Racebred4wd brake bias bracket.
Braided stainless brakelines.
Racebred4wd trailing arms +16mm
Racebred4wd control arms.
Racebred4wd canister mounts F&R.
Racebred4wd diff lamination.
Racebred4wd drop boxes with gearbox crossmember sliders.
Ironman HD panhard rods F&R.
Racebred4wd steering damper mounts.
Racebred4wd steering draglink.
Racebred4wd rock rod.
Racebred4wd bumpstop mounts.
Toyota 80series bumpstops F&R.
Old man emu 4" lift comp coils F&R.

[Jacket_1985]

But it took another week or 2(which felt like a month at the time) for my Shocks to arrive. so i drove it around stock. . . . . AGONY!
also at this point i was having to wait for my rear old man emu coils to be made because ARB were clean out of stock.
This is just up the road from my place above Boolarra.

[Jacket_1985]

My shocks arrived, so my suspension and airlocker went in. . . . . . always worth waiting for king smoothies.

Everything went in sweet, a few stripped nuts and de-threaded bolts and studs, but thats the way cookies crumble.
this is the night i picked it up from the workshop after the lift went in.

[Jacket_1985]

I had a set of new simex ET2 35/11.50-16's, on Allied 16x8 alloys sitting here, so i decided to throw them on for the time being. this is the morning after the suspension went under it.
I actually really liked the look of these as a wheelset. and the low-speed clearing characteristic's of the 2 lug pede's really worked with the NA td42.

[happygu]

Bought this around 6months ago. came with:

UHF
31's
ARB bar
IPF spotties
Safari snorkel
ARB Scrub rails
2in tough dog lift. . . . . . .

what can i do to it to make it better??? remember i'm a "beginner", i drive it daily, and take it offroad whenever i can. I go camping, fishing, shooting every week in it. i also drive it for work.


I'd sell it and buy another one.... :)

[nissannewby]

You might be surprised with how man folks are here as well as another forum. The wagon looks good finished so chop chop with pics lol. Hopefully the attitude doesn't carry over to this forum through members of another.

Anyway, where did you get the walker Evans from I'm trying to find a place to source them or did you just buy from over seas?

[Jacket_1985]

where did you get the walker Evans from I'm trying to find a place to source them or did you just buy from over seas?

I buy locally mate. . . . . iv had 3 sets.
when i buy my new set for my GUIV project, ill be buying them off Greg at G&S tyres. Ph: 0359 780 721 :)

[Jacket_1985]

So i went around the block to flex it up a bit.

[Jacket_1985]

So i drove a bit further round my block and got to some. nearly got stuck on first drive in middle creek. . .

[Jacket_1985]

at which point i needed sliders. . . . . before my sills got even more caved in!

[Winnie]

But it took another week or 2(which felt like a month at the time) for my Shocks to arrive. so i drove it around stock. . . . . AGONY!
also at this point i was having to wait for my rear old man emu coils to be made because ARB were clean out of stock.
This is just up the road from my place above Boolarra.

Hey jacket, where abouts in Boolarra are you? I live in Thorpdale.

[Jacket_1985]

This is when i listed it for sale, i had a bunch more parts ready to go on, but wasn't sure what was happening with my duramax GUIV, i wasn't 100% sure if i needed to cash this in to afford the rest of the conversion.

so i washed it.

[Jacket_1985]

Hey jacket, where abouts in Boolarra are you? I live in Thorpdale.

Im actually in yinnar south's postcode. But im between middle creek and morwell river. so in between yinnar and boolarra.

[Jacket_1985]

Then i went for a weekend camping in mcalisater river, and got stuck a few clicks above beurgoins.
Epic night, net result in the destruction of 2 of my Allied wheels by river rocks and a leaking rear axle seal.

[Jacket_1985]

So getting stuck like i did, and the resultant night i had. . . . . . . i didnt like it.

So i got myself some more power. comprised of:

UFI built td05 18g.
MTQ 3inch exhaust.
DTS manifold.
PWR 600x300x76 front mount intercooler.
2x Optima d31a's.

[Jacket_1985]

Got some autometer gauges to watch what my new turbo was up to. . . .
Also got rid of the old wheel and bought a series 2 steering wheel.

[Jacket_1985]

So i sold the allied's and simex's and bought these.

[Jacket_1985]

been on the car for 10min.

[93patrol]

looks awesome mate

[happygu]

I preferred the old set...I thought they looked sexy as....still the new ones are not bad though

[MudRunnerTD]

I AMA big fan of Walker Evans bead locks .!! Very tidy.

[Jacket_1985]

didnt get stuck.

[Jacket_1985]

yeah, so thought it was a bit rude, and waiting for a defect, so bought a rear bumper, a new ARB bullbar, and genuine flares.

[93patrol]

can i ask why you took the spare off the back and are you going to put a rear bar and swing away spare on

does the spare now sit in the back of the wagon

[Jacket_1985]

So i still didnt like the idea of getting stuck with what i had, so i added a winch.

Warn 8274.
Widened, small diameter drum.
Roller bearing end plate.
Gearbox/end plate bracing.
50m of supermax comp rope.
Solid state solenoid.
Warn 9.5xp motor.
R clipped freespool.
Tapped and capped brakeshaft.
Fully waterproof gearbox and motor.
Stainless fairlead.
plus my 2 d31 optima's of course.
with cigweld superflex cables, all ends properly terminated.

[Jacket_1985]

can i ask why you took the spare off the back and are you going to put a rear bar and swing away spare on

does the spare now sit in the back of the wagon

Yeah, spare is in the back now if i carry one. . . . too heavy and to big to fit on back door. even normal sized tyres break doors let alone 37's.
other thing is if it did fit, you couldn't see past it. a rear bar would be more for protection than storing my wheel.

[Jacket_1985]

also got a stainless snorkel made up somewhere in there. and washed it.

[Jacket_1985]

flamin' good work.

[NissanGQ4.2]

Nice build thread Jacket, did you cut the guard and fit the snorkel yourself? looks very neat

[Jacket_1985]

been playing with it. in the mud. . . . . i like mud.

[Jacket_1985]

Nice build thread Jacket, did you cut the guard and fit the snorkel yourself? looks very neat

Cheers mate. No i didnt, i ripped the safari off it and shannon did the rest.

[Jacket_1985]

out shooting varmints with my dog. and clearing a tree in the driveway.

[Jacket_1985]

Bought a set of roadies. . . . 33's.
Drove to queensland and back. clicked over 400,000km while i was doing that.
sold 33's because i bought 4.6 diff gears,
and another set of front and rear ARB airlockers.
So i bought some new 17" steelies and whacked a set of my Procomp extreme MT's on em i had sitting here.
Bought GU 11mm fuel pump.
Pulled out my ARB airlocker and looks like its sold already.
waiting on plenum and airbox to get made up.
Now running nothing but 37's. . . . . Procomps for dailys, and comp treps if the going gets tough.

need to get new clutch LOL.

[Jacket_1985]

Thats about it for 6months iv owned the car.

[Maxhead]

Not bad for a "beginner"...hey Jacket.....hahahhahahah

LOve your builds so will be watching your builds with interest... Hows that duramax going?

[Winnie]

Im actually in yinnar south's postcode. But im between middle creek and morwell river. so in between yinnar and boolarra.

Okay so what you're telling me is that this beast AND a duramax are within 15 mins from home and I didn't know about it? We're doing a forum trip to Aberfeldy on Australia Day weekend, base camp at O'tooles.

[Jacket_1985]

Okay so what you're telling me is that this beast AND a duramax are within 15 mins from home and I didn't know about it? We're doing a forum trip to Aberfeldy on Australia Day weekend, base camp at O'tooles.

There are a few duramax powered patrol conversions going on in the area atm. vince has had his for around a year. cloughy is building one, alans built one,
This white GU is my daily. iv gotta finish the conversion on my 06 TD42ti to automatic. once thats finished and i sell it, ill sink the money onto the duramax.
aberfeldy you say? i might come up for a look.

[Winnie]

Would be great to see you up there mate just as long as you have the duramax by then LMAO!

[Jacket_1985]

Last year i had series I and II GQ's and series I, II, III, and IV GU's.
this is the guiv im converting atm.
24125

this is a rb30 turbo i had early last year.
24126

This a basher i did early last year too.

[PMC]

Bought this around 6months ago. came with:

UHF
31's
ARB bar
IPF spotties
Safari snorkel
ARB Scrub rails
2in tough dog lift. . . . . . .

what can i do to it to make it better??? remember i'm a "beginner", i drive it daily, and take it offroad whenever i can. I go camping, fishing, shooting every week in it. i also drive it for work.

G'day mate,

All the best with your build! Hope you find all the info needed to assist you on this great forum!

Regards,

RLI

[NissanGQ4.2]

Last year i had series I and II GQ's and series I, II, III, and IV GU's.
this is the guiv im converting atm.

this is a rb30 turbo i had early last year.

This a basher i did early last year too.

Sounds to me like you have way to much money......care 2 share some *L*

[Winnie]

Mate you're out of control... Me likey!

[Jacket_1985]

Mate you're out of control... Me likey!

glad it entertains. should mention im a huge fan of the 4.2's. but iv still had 2 zd30's, and a rb30, and had a rd28 gu last year.
I sold my factory GUIV TD42TI ST-L nov year before last that i siorta' wish i still had.
been happy to move on from all the others.

Usual Stuff. just love the shape.
4.6's, arb airlockers F&R, 35's, arb barwork, stereo, lift, uhf, exhaust, etc.

[Clunk]

So I'd hazard a guess that you aren't overly keen on Patrols then???!!!!. ;)

Don't stroke it, TAP it!!!!.....

[lorrieandjas]

So I'd hazard a guess that you aren't overly keen on Patrols then???!!!!. ;)

Don't stroke it, TAP it!!!!.....

Can always tell a 'troll hater! :)

Jas

[growler2058]

glad it entertains. should mention im a huge fan of the 4.2's. but iv still had 2 zd30's, and a rb30, and had a rd28 gu last year.
I sold my factory GUIV TD42TI ST-L nov year before last that i siorta' wish i still had.
been happy to move on from all the others.

Usual Stuff. just love the shape.
4.6's, arb airlockers F&R, 35's, arb barwork, stereo, lift, uhf, exhaust, etc.

How much lift has the one above got?

[Winnie]

Jacket we will have to go for a play one day!

[Jacket_1985]

Can always tell a 'troll hater! :)

Jas

yeah, i dont like em much.


How much lift has the one above got?

2inch + 35's. i think its a perfect touring setup combination.


Jacket we will have to go for a play one day!

For sure mate.

[growler2058]

2inch + 35's. i think its a perfect touring setup combination.


.

Agree man that is a bloody good lookin set up

[Winnie]

Where do you normally go for a bash?

[Jacket_1985]

Where do you normally go for a bash?

Middle creek road, Morwell river road, and Traralgon south if im going to try stuff. . . . . lots of clay and hills,
Where do you go? any good stuff out near thorpdale? or you go over neerim sth etc?

[Winnie]

Middle creek road, Morwell river road, and Traralgon south if im going to try stuff. . . . . lots of clay and hills,
Where do you go? any good stuff out near thorpdale? or you go over neerim sth etc?

I've been out Morwell river way a few times. Haven't been out Neerim yet,I normally go near Mirboo North or head out to Aberfeldy

[Jacket_1985]

I've been out Morwell river way a few times. Haven't been out Neerim yet,I normally go near Mirboo North or head out to Aberfeldy

loads of fun to be had out near the old prison farm on morwell river rd when its wet. some good stuff out off livingston too.
Im having a daytrip down here with a few from melb, beginning of feb by the look of it, youre welcome to join us. . . .
This is from out there.

[Winnie]

loads of fun to be had out near the old prison farm on morwell river rd when its wet. some good stuff out off livingston too.
Im having a daytrip down here with a few from melb, beginning of feb by the look of it, youre welcome to join us. . . .

That'd be good mate, shoot us a PM closer to then and I should be able to make it

[Jacket_1985]

Bought my GUIV home from the workshop today.

[Rip'n'Shred]

Is this the duramax?

Love the posts and pics. Some really nice looking photos with great scenery you have there.

[growler2058]

Bought my GUIV home from the workshop today.

This the one thats getting the duramax??

[Sir Roofy]

Bought my GUIV home from the workshop today.

wheres the work shop at morwell

[Jacket_1985]

Is this the duramax?

Love the posts and pics. Some really nice looking photos with great scenery you have there.

cheers mate. no duramax in this one. its getting a 95,000km td42 and auto, with a wholesale automatics computer system.


This the one thats getting the duramax??

Not this one, Duramax is next project.


wheres the work shop at morwell

Racebred4wd.

[growler2058]

Man ya got some stuff happenin hahahahhaha im confused (not hard to do )

[Sir Roofy]

cheers mate. no duramax in this one. its getting a 95,000km td42 and auto, with a wholesale automatics computer system.



Not this one, Duramax is next project.



Racebred4x4[QUOTE]
know where you are now

[Jacket_1985]

my new airlocker solenoids arrived, so did my 150psi pressure switch. im going to move my compressor to the boot. too flamin' hot under the bonnet.

Bloody transport company. . . . . my fuel pump arrived on the 28th of dec, it sat at the depot for 2 days, no call, no delivery, and they sent it back without telling me. . . .
its on its way again from WA. . . . . this time ill make a concerted effort to intercept it while its in the area since toll obviously aren't competent enough to deliver it.

[Winnie]

my new airlocker solenoids arrived, so did my 150psi pressure switch. im going to move my compressor to the boot. too flamin' hot under the bonnet.

Bloody transport company. . . . . my UFI fuel pump arrived on the 28th of dec, it sat at the depot for 2 days, no call, no delivery, and they sent it back without telling me. . . .
its on its way again from WA. . . . . this time ill make a concerted effort to intercept it while its in the area since toll obviously aren't competent enough to deliver it.

Mate I know that Toll in this area are absolutely effin useless! Especially if they pass it onto GTS

[Jacket_1985]

Especially if they pass it onto GTS

We have ourselves a winner!

What do we think, Warrigul fuel injection for tune or take it to diesel tec in lillydale?

[Winnie]

Oh god you'll never see the bloody thing now

[Jacket_1985]

Oh god you'll never see the bloody thing now

I GOT IT!!! now just gotta fit it. and the engine chassis mounts arrived for my GUIV. nearly ready to bolt it in. . . .

[Sir Roofy]

we have ourselves a winner!

What do we think, warrigul fuel injection for tune or take it to diesel tec in lillydale?

think im likeing dieseltec

[mcleod]

great read and pics, you certainly seem to love the patrol's.

[Jacket_1985]

think im likeing dieseltec

Took it to Diesel-tec. . . . . iv Got issues.
Need a pump apparently. . . . . .

[Jacket_1985]

Intercooler fitted. I bought SFS silicone joiners thismorning, not cheap stuff, last time they cost me $14 an inch!!! this time i ebay'd em. . . . .

1x 100mm long straight hose 102mm ID.
1x 500mm long straight hose 76mm ID.
1x 90 degree reducing bend 102mm-89mm ID.
1x 90 degree reducing bend 76mm-51mm ID.
1x 90 degree bend 102mm ID.

Im running 3inch intercooler pipes all the way. im buying the stainless bends and cutting into shape, and the fella that made my snorkel is welding them, it will look better if he does it:harhar:.

[Sir Roofy]

took it to diesel-tec. . . . . Iv got issues.
Need a pump apparently. . . . . .

that,ll give you a head start to fix or replace

[Jacket_1985]

So pulled bullbar back off,
iv flipped the power steering cooler, mounted it behind Intercooler. and just run flexy pipe to the pump i got from enzed
i got new brackets made up to mount cooler a few mm further forward and higher. cooler is now in its final position.
all AC lines cleared perfectly, its bang in the middle, as high as possible and a good depth forward/back.

Next step is to cut the bullbar brackets some more thisavo to get it to clear the 3in cooler pipework. then ill start chopping holes to run the pipes through the Rad support panels.
Iv already taken the PS pipes outta the way and horns etc, shouldnt be to hard.

What you reckon? cut the entire wings off or just cut holes?

[growler2058]

Wings off i rekon

[Sir Roofy]

If it was mine i would cut holes,a pain in the butt,seems like you have it sorted
are you sure your far enough forward for any debris to clear or be cleared
between the rad and cooler,i know you like mud is this going to be a problem with the cooler

[Jacket_1985]

PS cooler now mounted behind Intercooler. and set in its final position. very close to winch. very close to air-con line on drivers side. good height. should have maximum airflow.:biggrin:

[Sir Roofy]

Looks good very tight though hope when you flex it wont cause any drama

[growler2058]

Looks good very tight though hope when you flex it wont cause any drama

Agree wouldnt wanna give a muddy bank a love tap ay..can the spot mounts be reduced at all?

[Jacket_1985]

Agree wouldnt wanna give a muddy bank a love tap ay..can the spot mounts be reduced at all?

Spot mounts? i cant mount the intercooler even 5mm further back, the outlet pipe wont clear the Air-con line. and the high mount is bolted flat against the face of the bullbar so that cant go forward.

im going to pull the bullbar off and see if i can grind the mounts a tad. and sit the bar/winch 5-10mm forward. if not, ill chop the whole center of the bar out and make a proper cradle that the winch will sit in, and slip the bar back on. . . . . whats left of the bar anyway. Haha. only other option is remove air con. or get smaller air con condensor.

[growler2058]

Spottie mounts on top of the bar looks mm away can they be reduced?


Sent from the crapper while on tappa

[growler2058]

Sorry man had a closer look on the phone they looked way close zoomed up they don't look bad


Sent from the crapper while on tappa

[Jacket_1985]

some knucklehead in a suzuki must have 'cleared' this tree, because the only thing that could fit in that gap is a zuke or a quad.

anyways. as i drove down the track not seeing a thing (6am and it was covered in scrub). . . i hit it at over 40kph, front of the car launched into the air and off the bank. i thought i was going over for a sec. and since i didnt remember what was down that bank (im not that familiar with the spot) i turned left hand down and anticipated a very swift bumpy ride/fall into the riverbed(pretty steep drops out there). but alas i was lucky and got caught broadside on some trees.

spent all morning getting it out. some minor damage. nothing to worry about.

[Sir Roofy]

Thats a funny angle to be on mate,glad your not hurt and no real damage

[Maxhead]

some knucklehead in a suzuki must have 'cleared' this tree, because the only thing that could fit in that gap is a zuke or a quad.

anyways. as i drove down the track not seeing a thing (6am and it was covered in scrub). . . i hit it at over 40kph, front of the car launched into the air and off the bank. i thought i was going over for a sec. and since i didnt remember what was down that bank (im not that familiar with the spot) i turned left hand down and anticipated a very swift bumpy ride/fall into the riverbed(pretty steep drops out there). but alas i was lucky and got caught broadside on some trees.

spent all morning getting it out. some minor damage. nothing to worry about.

Would have been funny seeing your face while you were going over ...hahahah, OK, maybe not. Glad it wasn't a big drop off and as Roofy said bloody good angle to be on. Glad you're all OK!
What sort of damage did it cop??

[cloughy]

Morwell river? I've seen a few funny marks about

[Jacket_1985]

Would have been funny seeing your face while you were going over ...hahahah, OK, maybe not. Glad it wasn't a big drop off and as Roofy said bloody good angle to be on. Glad you're all OK!
What sort of damage did it cop??

Ha, i was wearing my face of Resignation,
-only pushed in a gutter, and banged up the quarter a bit. rear passenger door received an update to an existing dent, and i may have bent a swivel housing. steering needs some attention. still drove it to melbourne yesterday. oh an i pushed the rear window in as i got winched backwards. but i straightened the window sill and put it back in.
ha, whenever i get stuck my winch doesnt seem to save me. this time i couldnt winch forwards at all. so needed another car. last time i stuck it in a river and buried it, i couldnt winch either. nothing to winch off. great way to spend a few grand. buy a winch that hasnt actually saved me yet. HAHA.


Morwell river? I've seen a few funny marks about

up the end of middle creek.

welcome to the forum.

[Jacket_1985]

love the look of low gu's on 37's. makes me wish mine was a bit lower. this is with over half a ton in the car.

[growler2058]

That looks beasty ay

[Nmcswan]

Your car is what I want mine to grow up into. Haha

[Jacket_1985]

finished moving the compressor and rewired it. under passenger seat.

[gokhangqtd42]

is very nice......good work.!!

[ChrisN]

finished moving the compressor and rewired it. under passenger seat.

Good spot for it. I did that once and had a line to a bayonet fitting on the bullbar.

Is that a fuse holder in the wiring? Don't forget to put another fuse next to the battery.

[growler2058]

Very neat man. I just can't get it together when it comes to anything elec for some reason it just peeves me ;)

[Jacket_1985]

Cheers fellas, its actually a lot neater than that under there now. . . . iv since pulled it apart again and redone it.

Updates for last few days.

I got my SFS silicone joiners for the intercooler pipes.
Iv organized myself and im having a go at making myself a 4inch exhaust, inc 4inch dump pipe!
I fixed my steering issue.
Replaced a bolt in my right radius arm that was flogged out.
Ordered new rose joint for rear kings.

Walker evans and treps are for sale. $4000 ono.
Winch is for sale. complete setup $2900 ono.

[Ben-e-boy]

I would love the treps, but 37's arnt on the priority list atm :(

have you gone any further with the plenum design

[Jacket_1985]

I would love the treps, but 37's arnt on the priority list atm :(

have you gone any further with the plenum design

not yet. :(

found this old pic.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/patrol_zpsc194a192.png (http://s1268.photobucket.com/user/Jacket_1985/media/patrol_zpsc194a192.png.html)

[MEGOMONSTER]

not yet. :(

found this old pic.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/patrol_zpsc194a192.png (http://s1268.photobucket.com/user/Jacket_1985/media/patrol_zpsc194a192.png.html)

Seems you have a water leak. Lol

[BigRAWesty]

Still looking tough as..
I'm guessing she's a keeper then now.? Duramax been put on hold a little longer?

Kallen Westbrook
Owner of
Westy's Accessories (http://www.nissanpatrol.com.au/forums/showthread.php?15134-Westy-s-Accessories.-A-small-back-yard-builder.)

[Jacket_1985]

Still looking tough as..
I'm guessing she's a keeper then now.? Duramax been put on hold a little longer?

Kallen Westbrook
Owner of
Westy's Accessories (http://www.nissanpatrol.com.au/forums/showthread.php?15134-Westy-s-Accessories.-A-small-back-yard-builder.)

Looks like i might keep it a bit longer yeah. -not the worst fate. i love the old TD.
looking forward to having the cash to finish off my GUIV. its slow going atm.

[Jacket_1985]

Still making it simpler. every bit of junk i can pull off the car makes it better.:lol: love things simple

Some guys have asked me where i ran my IC pipes. . . . . here is a pic.
just chopped the rad support in the flat section near the horns.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/P1000861_zpsa514e043.jpg (http://s1268.photobucket.com/user/Jacket_1985/media/P1000861_zpsa514e043.jpg.html)

Replaced stuffed rose joint in my LHS/R king shock.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/IMG_3957_zpsa0dee8fd.jpg (http://s1268.photobucket.com/user/Jacket_1985/media/IMG_3957_zpsa0dee8fd.jpg.html)

http://i1268.photobucket.com/albums/jj565/Jacket_1985/IMG_3952_zps5e7236cb.jpg (http://s1268.photobucket.com/user/Jacket_1985/media/IMG_3952_zps5e7236cb.jpg.html)

Been driving it.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/P1000786_zps1e977382.jpg (http://s1268.photobucket.com/user/Jacket_1985/media/P1000786_zps1e977382.jpg.html)

Also sold my old winch/bar setup and im gonna try something else. :wink:
Looks a bit odd atm with the stock white ARB bar on it.

http://i1268.photobucket.com/albums/jj565/Jacket_1985/P1000820_zpsb1d67c46.jpg (http://s1268.photobucket.com/user/Jacket_1985/media/P1000820_zpsb1d67c46.jpg.html)

[Winnie]

I like the white bar

Trying to use Motorculture

[Jacket_1985]

bought a set of allied savvana beadlocks and sticky treps.:)

[Winnie]

Are they 37s?

[Jacket_1985]

Are they 37s?

yep, 37x12.50-16 maxxis comp trepadors.

also bought a 30in single row LED lightbar. 12,600 lumens.

33250

[threedogs]

Light bars are very impressive on night drives, nothing beats them

[Jacket_1985]

and fitted my alloy race radiator.

[Jacket_1985]

sold old walker evans and 17in treps.

hopefully get my new set today.:first:

[Jacket_1985]

3in stainless intercooler pipework getting stripped and tigg'd tomorrow.

[Jacket_1985]

also bought a 12mm race injector pump. currently in the mail.
will see if i can get a note from this trombone. . . . .

still have plenum, airbox, injectors, eboost2 controller, 4in exhaust, clutch and some ceramic coating to go before i see any good results im guessing. but at least its making progress.

[BigRAWesty]

Still going with this one.. I thought she was going for a new project???

So what air box are you looking at? Or going custom?

[Jacket_1985]

Still going with this one.. I thought she was going for a new project???

So what air box are you looking at? Or going custom?

custom. will have an ls1 panel filter in it, 4in inlet and outlet, -will sit in the far passenger corner where the vacuum canisters used to be.

[Winnie]

Millweld style?

[Jacket_1985]

intercooler is plumbed up.