matfew
1st January 2013, 11:37 AM
Hey guys.
Questions are still flowing.
I swapped over the master cylinders and went to start bleeding it. Got 2 or 3 pumps out of it when it went all loose again n looked down to fluid flowing freely from slave.
The clucth fork seems to of let go somehow and is loose so the slave cylinder piston popped out.
Any ideas on whats wrong. If something simple is it easier to pull box out or engine out since engine is only sitting in with no exhaust or inlet gear attached yet.
Questions are still flowing.
I swapped over the master cylinders and went to start bleeding it. Got 2 or 3 pumps out of it when it went all loose again n looked down to fluid flowing freely from slave.
The clucth fork seems to of let go somehow and is loose so the slave cylinder piston popped out.
Any ideas on whats wrong. If something simple is it easier to pull box out or engine out since engine is only sitting in with no exhaust or inlet gear attached yet.