oem pcv valve

[stevogq]

so i went into nissan to get a new pcv the bloke quoted $295- for a new one!! damn expensive for something so simple and when i asked why so expensive his reply was its quality nissan :/

Then he told me to just block it off and when i questioned him to why the crank case dont need to breath he told me its for epa reasons thay use it and its a really big fine if they bust you, I told him he must be mixed up from the egr valve.

can someone point me to another way of getting around this or do i need to folk out 295 for a new one?

[nissannewby]

Why does it need replacing? You should be able to just give it a clean out and keep travelling.

[stevogq]

I'll give it a try

[nissannewby]

You will have to remove the rocker cover to do so but isn't a very big job. Is it blocked?

[stevogq]

It's not but I'm getting a fairbit of blowby

[my third 256]

id be giving garry at nissbits a call
also for your info did some hunting around anfound this site for parts no
http://www.motospecs.com.au/assets/files/downloads/Fuelmiser_PCV_Valves_Vaccuum_Switches.pdf
the info is and its an australian site
Patrol G60 1/61-12/80 6 4.0L P40 PCV-005 Not Used
Patrol GQ 2/88-12/95 6 3.0L RB30 PCV-102 Not Used
Patrol GQ, GU 1/90-9/01 6 4.2,4.5L TB42S,TB45E PCV-100
so went to another site and found prices
http://www.eziautoparts.com.au/index.php?target=products&mode=search&subcats=Y&type=extended&avail=Y&pshort=Y&pname=Y&pkeywords=Y&match=all&cid=266&q=pcv+valve&x=10&y=8

under $20.00 i think id give the nissandealer a big miss MHO

[stevogq]

id be giving garry at nissbits a call
also for your info did some hunting around anfound this site for parts no
http://www.motospecs.com.au/assets/files/downloads/Fuelmiser_PCV_Valves_Vaccuum_Switches.pdf
the info is and its an australian site
Patrol G60 1/61-12/80 6 4.0L P40 PCV-005 Not Used
Patrol GQ 2/88-12/95 6 3.0L RB30 PCV-102 Not Used
Patrol GQ, GU 1/90-9/01 6 4.2,4.5L TB42S,TB45E PCV-100
so went to another site and found prices
http://www.eziautoparts.com.au/index.php?target=products&mode=search&subcats=Y&type=extended&avail=Y&pshort=Y&pname=Y&pkeywords=Y&match=all&cid=266&q=pcv+valve&x=10&y=8

under $20.00 i think id give the nissandealer a big miss MHO

Thanks for that great info but ive got a rd28, I can't find one for it its a round valve that sits onto of the engine around 75mm in diameter, Nissan calls it a air control valve

[my third 256]

put a picture up so i know what to look for please