dual battery setup

[kevin07]

my next project started dual battery setup. i have fitted the tray and battery and i have decided where im going to put the ctek dual now i would like to hear from all of you or better some of you people what size cable will i need to use between the batteries and the charger ,thanks kev

[lorrieandjas]

Hi there - should be minimum 6 B & S (13mm diameter) cabling as I understand it. Will cost you about $5-6 per metre.....

[scotty83]

Don't forget to throw a fuse at each end of that cable as close to the batteries as practical. On the ctrl I think 35-50 amp auto reset would do the job. Check ctek setup instructions. 6 b&s will look after that unit easy.

Where did you decide to put the ctek unit as I am liking at changing from redarc isolator to this unit

Tapped on by ScottyB

[kevin07]

im going to put it between the second battery and the plate in front of the abs

[threedogs]

I'd be giving Yendor a PM this is his field