View Full Version : ZD 30 fan belt tensioner
mietzer
9th November 2012, 12:05 PM
my belt tensioner is on its way out it dose not stop squireling , i wonder if any one has a parts list and instructions for my 2004 patrol ?
MudRunnerTD
9th November 2012, 12:58 PM
Its a straight bolt off bolt on. You should be able to buy the pulley and bearing anywhere.
eBay search - ZD30 Tensioner (http://www.ebay.com.au/sch/i.html?_nkw=ZD30+tensioner&_sacat=0&_odkw=ZD30+idler&_osacat=0&_from=R40)
macca86
9th November 2012, 01:57 PM
I just done my pully and belt it took 20 mins to change over bolt on bolt off. You will need a torx wrench to change pully. I got mine from auto barn 60 for pully 80 for belt. Tensioner should be about 100
Sir Roofy
9th November 2012, 03:19 PM
When i did mine i just changed the bearing and works fine
go to bj bearings or something simular and order the
ntn bearing number wc 87503 this is the oe artical probly cost $2o or 30 +your torx tool
will be cheaper than mr nissan
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.