glow plug problem 2,8td Y60

[octagon]

Hello Im replace glow plug,but I have problem with conection rail and insulator.I dont know how properly instal insulator.Did enyone have wiring diagram for 2.8td Y60.Thanks in advance.

[Yendor]

The wiring diagram does not show the positioning of the insulators on the busbar.

What is your location? maybe a member close to you can help?

Or if someone with a 2.8td GQ could post some pictures of the glow plug busbar connections and insulators.

The Y60 2.8td runs two different types of glow plugs, the front three glow plugs are different to the rear three glow plugs.

Good luck with it mate.

Cheers Rodney

[DanielS]

Hi!

If you by insulators mean the black plastic washers? Then you put longer rail on the glowplugs, after that the insulators go on
Between the long and short rail. The 3 plugs closest to the drivers seet.

/ daniel

[octagon]

Hi!

If you by insulators mean the black plastic washers? Then you put longer rail on the glowplugs, after that the insulators go on
Between the long and short rail. The 3 plugs closest to the drivers seet.

/ daniel

Thanks D now I instal rail and insulator,and it work corectly.regards

[DanielS]

Your Welcome! Nice to been able to help.