View Full Version : Rear Quater Panel Cut
Moff
23rd October 2012, 09:42 PM
Hey guys, just a quick question, l am thinking of cutting the quarter panel of the rear of my GQ, after speaking to a few different people up here in Cairns, and getting different stories of everybody that l ask.
What legalities are there with this modification?
MudRunnerTD
23rd October 2012, 09:58 PM
I can't imagine any defect consideration mate? Go for it
simy
23rd October 2012, 10:02 PM
Has anyone had this done by a panel beater? cheapest i can find in Townsville is $500, and yet in VIC its only $250-$300.
Im not doing it myself as my GQ is immaculate and i don't want to stuff it
Bloodyaussie
24th October 2012, 08:55 AM
Where did you find it in Vic for that price???
Squalo
24th October 2012, 09:55 AM
Offroad Division will do the quarter chop for $350 including painting (Caboolture, QLD). He also sells a DIY kit that comes in various stages/prices.
Matt Tolson
0411 563 300 every day between 9 and 6.
matthew.tolson@bigpond.com
From elsewhere on the internet:
"here are our new DIY weld in 1/4 chop kits.
Tools and things you will need:
grinder (4 or 5 inch)
masking tape
welder (preferably MIG or TIG)
measuring tape (GU only)
side cutters
hammer
screwdriver
safety gear
4 levels available.
Poverty pack - $30
get the weld in plates, that's it,
Budget pack- $50
the budget kit gets you the plates to weld in and complete illustrated instructions on how to do this mod.
Standard Pack- $100
gets you the basic kit plus everything you need to get to the pre paint stage. Need to specify the size grinder you have.
Deluxe pack- $150
Get's you absolutely everything you'll need to make this look like and be a professional job right down to rust protection inside the new panels."
Bigrig
24th October 2012, 11:51 AM
Got mine cut, welded, taped, rust proofed for $400 in Brisbane ...
makeitfit
25th October 2012, 07:08 AM
I shall be doing mine this weekend and will cost me about , erm, well, er, I may have to mow the grass for her I guess :animierte-smilies-t
Bloodyaussie
25th October 2012, 07:18 AM
Would still like to know where in Melbourne does it for a reasonable price???
makeitfit
25th October 2012, 07:31 AM
Sorry mate can't help from northern hemisphere lol
Moff
27th October 2012, 12:47 PM
Ordered the budget pack, the only one he does now, of him on friday.
Offroad Division will do the quarter chop for $350 including painting (Caboolture, QLD). He also sells a DIY kit that comes in various stages/prices.
Matt Tolson
0411 563 300 every day between 9 and 6.
matthew.tolson@bigpond.com
From elsewhere on the internet:
"here are our new DIY weld in 1/4 chop kits.
Tools and things you will need:
grinder (4 or 5 inch)
masking tape
welder (preferably MIG or TIG)
measuring tape (GU only)
side cutters
hammer
screwdriver
safety gear
4 levels available.
Poverty pack - $30
get the weld in plates, that's it,
Budget pack- $50
the budget kit gets you the plates to weld in and complete illustrated instructions on how to do this mod.
Standard Pack- $100
gets you the basic kit plus everything you need to get to the pre paint stage. Need to specify the size grinder you have.
Deluxe pack- $150
Get's you absolutely everything you'll need to make this look like and be a professional job right down to rust protection inside the new panels."
bad055
1st November 2012, 08:11 PM
gunna do mine myself. there is a video on utube but he only pop rivets it.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.