Grease nipples

[y61patrol]

Hi i was wondering if any one had diagram/pictures as to where the grease nipples are located on a 2000 3.0 gr.


Any help would be most appreciated.

Car is parked in awkward position so cant spend ages searching for them under there.

[threedogs]

Your best friend here would be the search engine in top right of this page, positive you'll find your answer there
Dont know how to post link

[megatexture]

make sure you dont pump to much in also, sometimes less is best

[nissannewby]

There wont be alot on there. 1 on each drive shaft and possibly 1 on each uni joint. If aftermarket suspension components are fitted then there might be some on your tie rod ends. I think thats about it really

[threedogs]

was thinking most would be on tail shafts and maybe steering but not many though

[MQ MAD]

Hi i was wondering if any one had diagram/pictures as to where the grease nipples are located on a 2000 3.0 gr.


Any help would be most appreciated.

Car is parked in awkward position so cant spend ages searching for them under there.
Sometimes even from the factory grease nipples arent fitted,theres either nothin at all or there is a bolt fitted where a nipple should be
These bolts have to be removed and nipples fitted,call it cost cutting at the factory
Even my GQ still had bolts in the steering parts
There will be greasable points in tailshafts,both front and rear, most steering arms, most front ends bit and at the rear
Most parts that move should have a grease point
IF the cars hard to get under, park it on flat ground and slid on under, itll take awhile to do them all