Introduction

[sthnx]

Hi all,
Darren is my name , I have been playing with 4wd for many years and travelled many remote parts of Australia. I have just purchased an old 93 GQ wagon with an efi tb 42. This is a project to rebuild for my son who I hope learns a lot from the experience. So far I am about to pull the tb and convert to a td42, I have a td42 in the shed in many pieces it is an old silver top will be rebuilt in a week or so if I don't bugger up anything. The wiring may be a real issue being a efi im not sure how to go about removing the ecu and getting everything to work , any help will be welcome ? I will post some pics of the rebuild as I go.
Thanks Darren

[Bigrig]

G'day mate and welcome aboard - great people, information and laughs to be found on here, so join in to make the most of it!!!

Ask away on the questions in the relevant section mate and no doubt we'll assist wherever possible!

Enjoy!!

[threedogs]

Hello and welcome, plenty of GQ freaks here as well as heaps of info, Enjoy

[AB]

Welcome to the forum mate and good luck with it all.

My neighbour has done this recently and some help can be found here = http://www.nissanpatrol.com.au/forums/showthread.php?5432-Diesel-conversion-(TD42-from-TB42)&highlight=tb42+td42+conversion

Just ask any questions under the right area mate as you go along and keep us informed!

[Silver]

Welcome Darren - sounds like a great project for Father and Son.

You have probably thought of this - assuming the TB is sound, it might be time to sell it while it is running in the vehicle - there is a demand because of head and head gasket problems.

[growler2058]

G'day Darren welcome aboard mate gotta friendly mob here fulla great info and advice


Tap, Tap.......Who's there?

[MEGOMONSTER]

Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it.

[Dhuck]

Welcome to the forum mate.

[Petit caillou]

Welcome to the forum mate

regards
Petit caillou.

[Anton1981]

welcome to the forum! good luck in your project, wish you make it till the end and you son get a nice ride

[Maxhead]

G'day and welcome to the forum mate


..........on the move

[BARWICK]

Welcome mate