View Full Version : 3" lift for my 97 GU
Mattonpatrol
30th July 2012, 11:55 AM
I'm real close to getting a 3" suspension lift on my 97 GU and I will be doing it in my garage, but I have never done over a 2" lift before and I'm wondering what other things will need to be changed or maybe modified to suit the 3" lift?
MudRunnerTD
30th July 2012, 11:57 AM
Drop Boxes,
Drag Link
Brake Lines
Sway Bar Link extensions
Panard Rods likely NOT required
Easy to fit up and your going to have a ball mate.
Good luck
Mattonpatrol
31st July 2012, 08:32 AM
Ok awesome bud, thanks a heap for that! Will i also need to extend my front or rear tail shaft?
nissannewby
31st July 2012, 12:57 PM
You may have to flip your rear shaft but thats about it. As above with mudrunner once you have fitted it take it and get a wheel alignment done also.
MudRunnerTD
31st July 2012, 03:14 PM
Yep I had to flip my rear drive shaft on the GUIV but not the GQ? Go figure.
nissannewby
31st July 2012, 03:16 PM
Is the GUIV an auto?
MudRunnerTD
31st July 2012, 03:55 PM
Manual TD42Ti
nissannewby
31st July 2012, 06:34 PM
the Gu manual boxes are different to the GQ manual boxes maybe this is why.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.