Big_Roy
25th July 2012, 08:57 PM
Hi Guys,
I have trawled through the threads and found some useful info but I am still having trouble finding power for replacement rear lights. The vehicle is a 2006 gu series 4 ST. I thought the passenger side was plug and play and the drivers side need a piggy back from the passenger side.
So I removed the dummy lights and found a plug taped back on the passenger side, this had constant power to one pin but none of the other pins had power when parkers, brake, indicators etc were on. I noticed in the fuse box in the engine bay that there were empty spots for 'tail' but the spots had no socket so a fuse could not be put in.
Am I going to have to tap into the loom for the lights in the rear bar and run it up to the new lights or I missing something here, any help will be appreciated.
Cheers Roy
I have trawled through the threads and found some useful info but I am still having trouble finding power for replacement rear lights. The vehicle is a 2006 gu series 4 ST. I thought the passenger side was plug and play and the drivers side need a piggy back from the passenger side.
So I removed the dummy lights and found a plug taped back on the passenger side, this had constant power to one pin but none of the other pins had power when parkers, brake, indicators etc were on. I noticed in the fuse box in the engine bay that there were empty spots for 'tail' but the spots had no socket so a fuse could not be put in.
Am I going to have to tap into the loom for the lights in the rear bar and run it up to the new lights or I missing something here, any help will be appreciated.
Cheers Roy