PDA

View Full Version : New Member



nickverms
9th July 2012, 08:09 AM
Just wanted to say hi to you all.

Im located in Canberra!

I just aquired a 97 gq patrol with a rb30 conversion.

Its got a 2 inch lift and needs a few things done.

Trying to track down a wiring diagram as the interior light only comes on once the ignition is turned on.

The oil pressure light and guage doesnt seem to work with the conversion.

Last thing is the fuel tank was replaced with a 150lt one and the guage doienst work correctly!

If anyone is able to help let me know!

AB
9th July 2012, 09:58 AM
Welcome to the forum mate, feel free to ask any questions and join in the conversations.

We have manuals on here mate that you can download for free. You need 25 posts before you can download it but just join in some conversations and welcome some other new members and you'll rack up 25 in no time.

growler2058
9th July 2012, 10:13 AM
G'day mate welcome aboard gotta friendly mob here fulla great info and advice


Tap, Tap.......Who's there?

White Elephant
9th July 2012, 02:09 PM
G'day and Welcome to the forum! Enjoy your stay!

MEGOMONSTER
9th July 2012, 02:22 PM
Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it.

alexx
9th July 2012, 02:41 PM
Welcome to the forum Nickverms. Have a great time.

2TROLLFAM
9th July 2012, 03:31 PM
WELCOME to the forum!! Hope you enjoy trolling through the threads – there’s heaps here to learn & enjoy. Besides that everyone here is friendly and always ready to offer advice etc. . . ☺

threedogs
9th July 2012, 03:50 PM
Welcome mate I'm sure you"ll ejoy it great bunch with plenty of models covered for info

nickverms
9th July 2012, 05:05 PM
Im looking through the forums atm.

Im trying to figure out what the person that wired it in has done.
The interior light doesnt come on unless the ignition is switched to the accessories.
I found the wire and it seems that it doesnt have constant to the part of the fuse in the fuse box.
I ran a constant wire there and the fuel pump turned on.

I really need so find certain wires.

Is there someone thats done this conversion before and found the same issues?

NissanGQ4.2
9th July 2012, 05:18 PM
Welcome 2 the forum

Great bunch of members on here always willing 2 help out where they can

You are better to post any questions in a new post in the reinvent category as not all members view the introduction thread, if your not sure what category 2 put something in, just post it in general chat and admin or mods will move it 2 the correct section.

Sounds like you have some serious wiring issues, post up a new thread in the electrical section and let as know exactly which interior light is causing you the drama's.

Cheers

Todd

Dhuck
9th July 2012, 05:50 PM
Welcome to the forum mate

Finly Owner
9th July 2012, 10:56 PM
Hi and welcome to Nissans Nut House Nick.



Tim

Maxhead
10th July 2012, 06:23 AM
G'day and welcome to the forum mate

Marshallleo
10th July 2012, 12:53 PM
welcome to the forum, should find all the advice ya need on here! ;)

eliurquhart
10th July 2012, 02:27 PM
Hey Mate, welcome on, great place to get your questions, experiences and tips heard!
Enjoy