JuzGU
31st May 2012, 07:04 PM
hi guys
i am in the process of putting a turbo on my tb45 and am just about to start running the intercooler piping, but i am not sure where i should now position the MAF sensor.
Whether between the intercooler and intake manifold, between the turbo and the intercooler or between the air filter and the turbo?
The piping will all be 2.5" apart from the pipe from the air filter to the turbo which will be 3"(same size as maf piping)
Also does anyone know where i can get an adapter to screw to the end of the maf pipe in order to join a silicone hose joiner to it?
The BOV will be mounted just before the intake manifold on the last section of straight pipe.
I have attached a drawing of how my piping will be layed out
i am in the process of putting a turbo on my tb45 and am just about to start running the intercooler piping, but i am not sure where i should now position the MAF sensor.
Whether between the intercooler and intake manifold, between the turbo and the intercooler or between the air filter and the turbo?
The piping will all be 2.5" apart from the pipe from the air filter to the turbo which will be 3"(same size as maf piping)
Also does anyone know where i can get an adapter to screw to the end of the maf pipe in order to join a silicone hose joiner to it?
The BOV will be mounted just before the intake manifold on the last section of straight pipe.
I have attached a drawing of how my piping will be layed out