Need a HUGE favour next week

[aussiemale]

G'day all,
Work has me flying to Syd next week and was wondering if anyone can help me. Need a SHITELOAD of stuff for the MQ but parts in NZ are as rare as hens teeth. Want something new..no chance unless you want to pay more in shipping than the part purchased.
If anyone has any contacts to help me, needing spacers to raise my MQ and needing them cheap but not nasty. Work will have me popping back and forward so will be an ongoing thing (every couple of months or so). Priorities will be bushes, hoses, gaskets etc.
Just be aware, do lose a lot in the exchange rate and am married, WITH a 14yr old with a bottomless stomach
Cheers
Bryan

[NissanGQ4.2]

Hi Bryan

Are you going to be staying in Sydney itself or elsewhere???

Cheers

Todd

[Finly Owner]

Some parts should be ableto be sent to your Sydney base from any good supplier on here as a vendor. Or try Ebay as L28 is available on there.

[aussiemale]

Going over for a training session at Homebush for a couple of days Todd. Thanks for the heads up Finly.

[NissanGQ4.2]

needing spacers to raise my MQ and needing them cheap but not nasty.

Bryan, I assume your after body mounts, what size body lift are you looking for?

Cheers

Todd

[GQ TANK]

DO a search on the assie EBAY site there are a few vendors doing them. ebay.com.au, have them ship to your motel or to where you are working. I ave done the same when I was working in NZ.

Also see if you can fined a plastic supplier in NZ with the correct polyproperlane - im sure of the exact material used.

They may be able to supply you a the correct materail cut to the right size (ie 50mm) (If I rememebr you will need 8 for a lwb)

The bolts are High tensile - I think M12 around 150mm long - bolt places should be able to get them.

Contact the local bursons near where you are staying for the gaskets etc.