Crankshaft
3rd May 2012, 09:41 AM
Crankshaft here.. Owner of a G60 for about 20 years and the old beast still goes well and everywhere but is no longer registered. :(
BUT
Recently purchase TWO Mq shorties to play with one is registerd and with only 140,000 2.8 Petrol and gas. but no extra bits the other is unreg but has all the good stuff- springs, lockers, heavy clutch, new slide windows, extractors, new dizzy, leads, plugs, alternator, SAAS seats, and new BFG's. All the good stuff on a vehicle thats otherwise pretty sad.
So a bit of work and I should end up with a pretty cool toy.
I have the winch and am going to make it portable into Hayman reece hitches.. Front, back and each side.
First job is the clutch but while it is underway and the motor is out probably the extractors
Alan
BUT
Recently purchase TWO Mq shorties to play with one is registerd and with only 140,000 2.8 Petrol and gas. but no extra bits the other is unreg but has all the good stuff- springs, lockers, heavy clutch, new slide windows, extractors, new dizzy, leads, plugs, alternator, SAAS seats, and new BFG's. All the good stuff on a vehicle thats otherwise pretty sad.
So a bit of work and I should end up with a pretty cool toy.
I have the winch and am going to make it portable into Hayman reece hitches.. Front, back and each side.
First job is the clutch but while it is underway and the motor is out probably the extractors
Alan