2.8 replacement turbo...

[Xntric]

I have just blown the turbo seal and I'm burning oil now....

Does anyone know what replacment turbo model I can put on the 2.8 ...googling around gives me gt1752.. Is this correct..

[97_gq_lwb]

If it is a gq the rebuild upgrade kits are fairly cheap.
http://www.ebay.com.au/itm/Turbo-Rebuild-Kit-Garrett-T25-RD28-Nissan-Patrol-89-96-/120487500334?pt=AU_Car_Parts_Accessories&hash=item1c0d9d5a2e

[Xntric]

its the GU 98 2.8

[Xntric]

I just pulled it off its a M24 Garrett. Been trying to source one in NSW not very easy....

[97_gq_lwb]

http://www.ebay.com.au/itm/Turbo-Rebuild-Kit-97-02-Nissan-Patrol-RD28T-ZD30ETi-/270956426984?pt=AU_Car_Parts_Accessories&hash=item3f1642f6e8

[Radmobile]

Hey mate I got a sr20 turbo with a modified rd28 manifold ready to throw on if ya want it

[Radmobile]

Also got a second hand rd28 turbo in good nick

[Wine_maker]

Hi mate!

I also have a little problem with turbo, but I'am thinking about thing like this (completely ready to install and already balanced cartridge) -
http://www.ebay.com.au/itm/Garrett-GT1749V-GT1752S-Turbo-CHRA-Core-Cartridge-/390264725486?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5add971fee

My mechanic said to me that if I will use the repair kit and disassemble the cartridge I will newer rebuild it with right shaft balance and after a while the disbalance of shaft will broke down the bearings again.
And if install this cartridge it will be new turbo in old body.

[Xntric]

Radmobile thanks for offer I read the reply to late I ended up buying a new one from Garret, brand new $1200.. I must have rang every wrecker in the state no ones got one..The guys at central coast 4x4 wreckers tried to source one and couldn't..

I sent it off to be rebuilt the technician said it can't be done it was damaged on inside...he said it was starved of oil that's why it failed... The shaft was cracked in half.... It looks like I need to seriously clean out the oil lines that are feeding the turbo as they might be clogged.....maybe sludge or need of serious oil change..

Does anyone know the best way to drain the oil and flushbthebold stuff out...

[Shaunous]

Just use that diesel engine flush from any car joint and go by the directions it says, and service every 5000km.

Always make sure you let your engine cool down by idling with no load, so the turbo is always well lubricated after a long or load demanding drive, i installed a turbo timer cause i'm lazy so I can lock the car and let it idle away on its own for 2minutes...

Shaun...

[Xntric]

Got the new turbo installed Garret GT1752 ...damn for moment I thought it was pimped.....it goes extremely well for a 2.8...I was impressed.....I flushed the engine and the intercooler.....changed oil to the Valvoline super diesel it goes nicely now....

Might have to do the 3" dump and exhaust next

[powkers]

If it is a gq the rebuild upgrade kits are fairly cheap.
http://www.ebay.com.au/itm/Turbo-Rebuild-Kit-Garrett-T25-RD28-Nissan-Patrol-89-96-/120487500334?pt=AU_Car_Parts_Accessories&hash=item1c0d9d5a2e

it is awesome in poland regeneration of Garrett T25 costs about 320 Au $
Thanks

[Xntric]

Here re-conditioning or regeneration is not too expensive but mine was stuffed so had to buy a new one...