-
14th March 2018, 12:58 PM
#41
SkippyGU
Anyone know any good machining shops to do the head and the block for me. Also I won’t need to have the cylinders honed because I’m replacing the sleeves is this right
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
14th March 2018 12:58 PM
# ADS
Circuit advertisement
-
14th March 2018, 01:13 PM
#42
Legendary
Where abouts are you mate, liners will need to be honed they don't come finished.
Sent from my SM-G930F using Tapatalk
-
-
14th March 2018, 03:06 PM
#43
SkippyGU
I’m in east and south east Victoria.
Ok awesome thanks I’ll make not of that
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
14th March 2018, 05:41 PM
#44
Smart like tractor
Originally Posted by
JackCollo
Anyone know any good machining shops to do the head and the block for me. Also I won’t need to have the cylinders honed because I’m replacing the sleeves is this right
Sent from my iPhone using Tapatalk
Any one who will not use liquid nigrogen to install your liners. Specify that. PRESS FIT ONLY. DON'T LET THEM TELL YOU OTHERWISE. specify it and even make them sign before commencing work.
Some people drop the liner the last few mm and that can and HAS caused tiny fractures around the fire ring. This can and HAS caused the liner to drop, this causes catastrophic failure. The piston goes down to BDC and drags the liner with it, forcing it into the crankshaft. This has happened and no doubt will happen again
96 GQ coil/Cab
08 G6eT
-
-
14th March 2018, 05:46 PM
#45
SkippyGU
Bloody hell will definitely make sure no liquid nitrogen and I’ll make them sign for it.
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
14th March 2018, 06:25 PM
#46
SkippyGU
How do I know if they have used liquid nitrogen?
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
14th March 2018, 06:40 PM
#47
Legendary
Don't think you could tell just have to take their word for it. There's a bloke in Clayton who is really good if that's not too far. . .
Sent from my SM-G930F using Tapatalk
-
-
14th March 2018, 06:43 PM
#48
SkippyGU
Nah Clayton is easy for me
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
14th March 2018, 08:31 PM
#49
Legendary
Oh cool, Google go2 engines and give Omar a call see how you go. .
Sent from my SM-G930F using Tapatalk
-
-
15th March 2018, 06:51 PM
#50
SkippyGU
Spoke to go2 motors today and they said they freeze the liners before pressing them in. Also they won’t machine the motor if I am rebuilding the motor myself bc of warranty and the blame game that can come afterwards.
Sent from my iPhone using Tapatalk
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-