Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Tested the flex out over some rocks out Eldorado, scored a fire extinguisher that will make a great air tank , some wanker has dumped about 20 of them in the Park .
Tested the flex out over some rocks out Eldorado, scored a fire extinguisher that will make a great air tank , some wanker has dumped about 20 of them in the Park .
Good work mate, pics pretty please & recycling at its best :-)!
Arseholes, some dumping pricks hey :-(
Extinguishers please do be careful though as a lot of gear us blokes buy can run high. ARB twin pumps for example are set @150psi ish and many blokes are running air tools too :-)
Good work mate, pics pretty please & recycling at its best :-)!
Arseholes, some dumping pricks hey :-(
Extinguishers please do be careful though as a lot of gear us blokes buy can run high. ARB twin pumps for example are set @150psi ish and many blokes are running air tools too :-)
Mine runs to 150 as well , extinguisher is rated to handle over 400 psi and normal operating pressure is 190 so as long as I get the cap right it should all be good .
Gold then mate :-)! I've got quite a few given to me from CFA retired changeovers etc.. Generally use em as fertiliser pressure packs around the block at low PSI. Should we worry about rust in these old tanks? Mind me there is quite the tolerance down to 150psi from 400psi spec you kindly educate me ;-)
I'll post some pics of the extinguisher tomorrow and the pressure limits and testing figures , I've got to go back out for some wood and I now have to grab another three , son wants two and I'm going to try for a two tank setup.
Extinguisher is roughly 150mm diameter by 350mm high .