What has made you Happy today??

[TPC]

It's probably on instagram too tone 😁

Actually he's not that young but not far off!

Along with a selfie of the outfit he is wearing tonight..

[Avo]

A shit load of Jim Beam and coke ...... the stuff u drink not snort!!!

Never tried snort n jim bream

Sent from my SM-G930F using Tapatalk

[Yeti's Beast]

Picked up this beauti



Sent from my iPhone using Tapatalk Pro

[rusty_nail]

Hey bud looking awesome, i have to try and get over your side of town and come and check it out mate. Hope Teags and little Lacey are doing awesome.

Mate did you make the frame for the gate? or buy it? the timbers on the gate look like a decent size? 125x35 or something? The bad news is gate is going to sag mate, sorry bud. It really needs diagonal bracing from the hinge side bottom to the top. The gate looks Long though and a Diagonal brace is probably inadequate to be honest? maybe a double brace. see below.

Attachment 76738

In the pic above i assume it is hinged from the left side. the solid yellow bracings are paramount. From the bottom they carry weight and will support the gate from the bottom hinge. given the width of the opening i'd be concerned about the top rail of the gate bending over time at that middle point to be honest and there may be an argument for the second bracing of the broken yellow line also. The broken yellow will be a tension brace and less important but may offer tension support to the outer section over time and limit the stress on that top rail.

If you wanted to try using Hoop Iron strap or something it would need to be Opposite and you would brace it using Hoop Iron to the broken yellow lines and the weight would be hung from the top hinge. Hope thats helpful mate.

Hey bud, it's actually two Gates, with the seam hidden behind the centre post. The frame is made from steel and the support structure which the hinges on either side is braced to outer structures. At the moment it is solid. If it sags I will reinforce, but will wait for that to happen. I dressed the outer parts today and it looks much better. Nice and solid too.

Sent from my SM-G930F using Tapatalk

[rusty_nail]

Hey bud looking awesome, i have to try and get over your side of town and come and check it out mate. Hope Teags and little Lacey are doing awesome.

Mate did you make the frame for the gate? or buy it? the timbers on the gate look like a decent size? 125x35 or something? The bad news is gate is going to sag mate, sorry bud. It really needs diagonal bracing from the hinge side bottom to the top. The gate looks Long though and a Diagonal brace is probably inadequate to be honest? maybe a double brace. see below.

Attachment 76738

In the pic above i assume it is hinged from the left side. the solid yellow bracings are paramount. From the bottom they carry weight and will support the gate from the bottom hinge. given the width of the opening i'd be concerned about the top rail of the gate bending over time at that middle point to be honest and there may be an argument for the second bracing of the broken yellow line also. The broken yellow will be a tension brace and less important but may offer tension support to the outer section over time and limit the stress on that top rail.

If you wanted to try using Hoop Iron strap or something it would need to be Opposite and you would brace it using Hoop Iron to the broken yellow lines and the weight would be hung from the top hinge. Hope thats helpful mate.

And you're welcome over any time mate

Sent from my SM-G930F using Tapatalk

[firm351]

Been a while since I've been on here, good to be back. Started a new job a few months ago here's some pics of my new babies.

Got 11 of these suckers now, fun times!!!

Sent from my SM-G960F using Tapatalk

[Pete49]

good to swap into a GQ then....

[MudRunnerTD]

Hey bud, it's actually two Gates, with the seam hidden behind the centre post. The frame is made from steel and the support structure which the hinges on either side is braced to outer structures. At the moment it is solid. If it sags I will reinforce, but will wait for that to happen. I dressed the outer parts today and it looks much better. Nice and solid too.

Sent from my SM-G930F using Tapatalk

No probs, yeah i could see that it was a welded frame. If that is 2 gates then the bracing should be from the borrom up the the middle from each side. Looks good mate. Look forward to checking it out.

[jay see]

Have had the pleasure of driving through the hills with the trol on Friday. Picked up my son from school in Essendon and took the scenic route which was actually quicker to Seville and then back home. Then on Saturday drove the same route opening up the wifes v8 through the hills.

Man I love that drive.

Sent from my A1601 using Tapatalk

[mudnut]

Been a while since I've been on here, good to be back. Started a new job a few months ago here's some pics of my new babies.

Got 11 of these suckers now, fun times!!!

Sent from my SM-G960F using Tapatalk

Where are they sourcing there fuel?