-
23rd July 2017, 07:25 PM
#101
Thanks mate that's perfect, looks like they're all in order so I might be able to put it all together in a word document and print it all out.
Cheers
-
The Following User Says Thank You to AntonGU For This Useful Post:
NissanGQ4.2 (23rd July 2017)
-
23rd July 2017 07:25 PM
# ADS
Circuit advertisement
-
27th September 2017, 02:47 PM
#102
Administrator
Confirming all of Darrens Photobucket images are now hosted locally!
-
The Following 7 Users Say Thank You to AB For This Useful Post:
Bacho86 (27th September 2017), Clunk (27th September 2017), jack (27th September 2017), MB (27th September 2017), mudnut (27th September 2017), MudRunnerTD (28th September 2017), mudski (27th September 2017)
-
28th September 2017, 10:06 AM
#103
Moderator
Thanks AB. This thread get a linked on Facebook all the time so it's great that it's back up again. Cheers for your effort mate
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
-
17th December 2017, 06:01 PM
#104
Legendary
Looks like this is going to be my next job on the troll.
I've got it booked in for late Jan to do the rear main seal finally pulled my finger out, definitely not doing that at home and have been quoted $375 to do the hub, one side. With one new seal kit wont the other side leak soon. I mean the old seal won't hold as good as the new one therefore leak.
I'm considering doing both sides at home, just not to sure if it's something that I can handle. I've gone as far as replacing a spindle and bearings, how much more is involved and what specialist tools are required if any.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
GQtdauto (17th December 2017)
-
17th December 2017, 08:06 PM
#105
The 747
Originally Posted by
jay see
Looks like this is going to be my next job on the troll.
I've got it booked in for late Jan to do the rear main seal finally pulled my finger out, definitely not doing that at home and have been quoted $375 to do the hub, one side. With one new seal kit wont the other side leak soon. I mean the old seal won't hold as good as the new one therefore leak.
I'm considering doing both sides at home, just not to sure if it's something that I can handle. I've gone as far as replacing a spindle and bearings, how much more is involved and what specialist tools are required if any.
Sent from my A1601 using Tapatalk
More than half way there. If you had no issues doing that part then you'd be fine to do the rest.
Sent from my SM-G935F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
jay see (17th December 2017)
-
17th December 2017, 09:54 PM
#106
Moderator
Originally Posted by
jay see
Looks like this is going to be my next job on the troll.
I've got it booked in for late Jan to do the rear main seal finally pulled my finger out, definitely not doing that at home and have been quoted $375 to do the hub, one side. With one new seal kit wont the other side leak soon. I mean the old seal won't hold as good as the new one therefore leak.
I'm considering doing both sides at home, just not to sure if it's something that I can handle. I've gone as far as replacing a spindle and bearings, how much more is involved and what specialist tools are required if any.
Sent from my A1601 using Tapatalk
All your questions are answered in the 1st post of the thread. You will be fine mate.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
jay see (17th December 2017)
-
21st December 2017, 09:12 PM
#107
Legendary
Should I be replacing bearings as well.
Wheel bearings were changed 40,000 km ago and offset king was less than that. Was just going to repack them.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
22nd December 2017, 10:44 AM
#108
Originally Posted by
jay see
Should I be replacing bearings as well.
Wheel bearings were changed 40,000 km ago and offset king was less than that. Was just going to repack them.
Sent from my A1601 using Tapatalk
I'd replace. Most of the work is in the labour for this job. Replace bearings, repack the old ones and put them in a zip lock bag in the back of the truck as spares.
-
-
22nd December 2017, 08:47 PM
#109
Moderator
Originally Posted by
jay see
Should I be replacing bearings as well.
Wheel bearings were changed 40,000 km ago and offset king was less than that. Was just going to repack them.
Sent from my A1601 using Tapatalk
yeah i would replace all but the Offset King pin bearing. It has not done that much work and they are expensive.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
jay see (24th December 2017)
-
26th December 2017, 08:29 PM
#110
Legendary
Don't think this is going to happen.
Time poor. We get back from Tassie on a Thursday night and I'm back to work on Monday morning. While the troll is in for the rear main I thing I'll get both hubs done.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
Buma5 (24th January 2021)