-
14th October 2016, 11:57 PM
#1
Legendary
-
The Following User Says Thank You to dom14 For This Useful Post:
mudnut (15th October 2016)
-
14th October 2016 11:57 PM
# ADS
Circuit advertisement
-
15th October 2016, 12:19 AM
#2
Patrol God
Too easy. It is a common problem on the dirty thirty.
My advice is: not to follow my advice.
-
-
15th October 2016, 01:17 AM
#3
Legendary
Originally Posted by
mudnut
Too easy. It is a common problem on the dirty thirty.
Nah...it was never easy. Until I used Pertamtex Ultra Grey and did a thorough cleaning of the rocker cover edge groove, rubber gasket, cylinder head edges. It was left for two days to cure. That was the key.
-
The Following User Says Thank You to dom14 For This Useful Post:
mudnut (15th October 2016)
-
16th October 2016, 10:25 PM
#4
Legendary
-
-
28th November 2016, 09:12 AM
#5
RD28 with vacuum pump, engine settings
Hi guys n gals, this is my problem with my 1998 RD28. Before I take the rocker cover off, does anyone know what the story is with the engine setting to put the cover back on? It has a 'vacuum pump?' on top.
-
-
28th November 2016, 02:10 PM
#6
Legendary
Originally Posted by
Oversize
Hi guys n gals, this is my problem with my 1998 RD28. Before I take the rocker cover off, does anyone know what the story is with the engine setting to put the cover back on? It has a 'vacuum pump?' on top.
Open a new thread to discuss your issue. You get the attention that way.
-
-
28th November 2016, 05:48 PM
#7
Thanks Dom14, Thought I would attract the attention of those in the know! Shall try a new post.
-