-
19th March 2017, 04:17 PM
#1
Expert
Marks Adaptor for 07 4.8ltr
Hey All,
I have 2007 4.8 GU and have connected the plugs to what I think are the plugs near the transfer case (see pics) however nothing changes after being set. Both wires are green that come out of the transfer case. Only problem with the 4.8 is that very few have a lot of knowledge about them.
Am I doing something wrong?
Thank you.
2007 GU ST-S 4.8 Patrol.
40mm heavy duty springs, Dual batteries,
140 ltr fuel tank,Custom 60ltr water tank, draws, cargo barrier, bull bar, IPF spotties, UHF.
-
-
19th March 2017 04:17 PM
# ADS
Circuit advertisement
-
20th March 2017, 02:55 PM
#2
Patrol God
@Yendor might be of help,
what are you actually trying to do, sounds confusing a bit,,,lol
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
20th March 2017, 09:40 PM
#3
Expert
Originally Posted by
threedogs
@
Yendor might be of help,
what are you actually trying to do, sounds confusing a bit,,,lol
Just correct my speedo so it reads correct. Here is a link to the unit.
http://www.marks4wd.com/speedo-corre...mfk2800gu.html
2007 GU ST-S 4.8 Patrol.
40mm heavy duty springs, Dual batteries,
140 ltr fuel tank,Custom 60ltr water tank, draws, cargo barrier, bull bar, IPF spotties, UHF.
-
-
22nd March 2017, 10:26 PM
#4
Expert
Marks Adaptor for 07 4.8ltr
For anyone who searched this in time, the above pic is the speed sensor and it connects directly into the Marks adaptor cabling.
2007 GU ST-S 4.8 Patrol.
40mm heavy duty springs, Dual batteries,
140 ltr fuel tank,Custom 60ltr water tank, draws, cargo barrier, bull bar, IPF spotties, UHF.
-
The Following User Says Thank You to Skitzyrex For This Useful Post: