-
12th January 2017, 04:49 PM
#11
Unfortunately not, once I finish this swing though I'll go through the above mentioned list and hopefully one of them will fix the issue. I definitely need to give the truck some love though it just drove across Australia.
-
-
12th January 2017 04:49 PM
# ADS
Circuit advertisement
-
12th January 2017, 10:22 PM
#12
Originally Posted by
Royce
Thanks Mudski will have a look at the bushes when I get home.
I see that both yourself and mudnut are Vic boys, I don't suppose either of you would be interested in swapping knowledge and your shed for beer and a laugh? I just moved to VIC and sold the majority of my tools before the move.
Yes Craig and myself ate both in Vic. But he is about 4 hours from me. Where are you?
Sent from my GT-N7105T using Tapatalk
-
-
12th January 2017, 11:51 PM
#13
Originally Posted by
mudski
Yes Craig and myself ate both in Vic. But he is about 4 hours from me. Where are you?
Sent from my GT-N7105T using Tapatalk
At the moment north Melbourne, moving to prahran-ish area in feb, but I work away so I can drive to anywhere any day in my time off, it's not a bother at all, i'm originally from Perth so around the corner in my old life is an hour and a half drive away.
-
-
14th January 2017, 01:06 PM
#14
Im in Mill Park but not for long... and havent yet found a place to reside too. So right now my garage is full and my tools have been boxed up.
Sent from my GT-N7105T using Tapatalk
-
-
14th January 2017, 05:00 PM
#15
Patrol God
Neutral to first has no synchro. If it hard to initially select gears all the time then check the clutch system.
-
-
14th January 2017, 11:39 PM
#16
Originally Posted by
nissannewby
Neutral to first has no synchro. If it hard to initially select gears all the time then check the clutch system.
I was referring to first to second. Just to clarify things.
Sent from my GT-N7105T using Tapatalk
-
-
15th January 2017, 01:10 PM
#17
I have a new symptom, my missus is saying that changing from second to third there is a lag from putting it into gear until it's actually in gear, she said that if she puts her foot on the acceleration straight after changing gear the revs his 3-4000 and then she'll take her foot off the accelerator and she can then hear it and feel it drop into gear.
I'm assuming this will definitely be clutch issue? Does anyone know of a good mechanic to take it to in VIC?
-