-
14th August 2018, 05:25 PM
#8531
Originally Posted by
foggs
Where did you get the steering wheel radio control? Been looking for one of these for ages.
Got it through Nissan. I can get you the part number for it if you want.
-
-
14th August 2018 05:25 PM
# ADS
Circuit advertisement
-
14th August 2018, 10:07 PM
#8532
Advanced
Originally Posted by
mudski
Got it through Nissan. I can get you the part number for it if you want.
That would be great. Does it come with the wiring?
2012 CRD 30TD Auto Wagon, 15L/100km | 2" KYB Lift | 3" Exhaust | ECU Remap | HPD boost control | Provent Catch Can | EGR Block | Bullet Snorkel | Dual Battery | Redarc SBI12 | Projecta batt Monitor | Auto Headlights | iDrive Throttle Control | NU3001 7" Android Stereo | Sound Deadening| Reverse Camera | Dashcam | Amp, 12" Sub | 300W Inverter | USB Chargers | Barn Door Gas Strut | Awning | Mods list shrinking
-
-
14th August 2018, 10:36 PM
#8533
Originally Posted by
foggs
That would be great. Does it come with the wiring?
No wiring, you will need a clock spring too that has the required wiring. I found a Patrol on Carsales which had dual steering controls and used the VIN from this to get the required parts. Still haven’t done it yet.
Sent from my crapPhone using Tapatalk
-
-
14th August 2018, 11:00 PM
#8534
Advanced
Originally Posted by
mudski
No wiring, you will need a clock spring too that has the required wiring. I found a Patrol on Carsales which had dual steering controls and used the VIN from this to get the required parts. Still haven’t done it yet.
Awesome, thanks for that.
2012 CRD 30TD Auto Wagon, 15L/100km | 2" KYB Lift | 3" Exhaust | ECU Remap | HPD boost control | Provent Catch Can | EGR Block | Bullet Snorkel | Dual Battery | Redarc SBI12 | Projecta batt Monitor | Auto Headlights | iDrive Throttle Control | NU3001 7" Android Stereo | Sound Deadening| Reverse Camera | Dashcam | Amp, 12" Sub | 300W Inverter | USB Chargers | Barn Door Gas Strut | Awning | Mods list shrinking
-
-
17th August 2018, 07:55 AM
#8535
Daily Lurker
Haven't done anything yet, but I'm planning on purchasing a sway bar from superior for the front end at bending the factory one several years ago and not being bothered to replace it. Has anyone had experience with it? Is it worth the money or should I just source a factory one. Currently running A4"lift with drop boxes.
Also noticed they sell genuine hubs (auto) for$160 a pair, my d/s hub is bugger so needing to look into replacing them. The are cheap Chinese manual ones (I'm keen to change to manual) but if decent manual hubs are really expensive then I'll probably just replace with the genuine ones.
Cheers
Rusty
Sent from my SM-G930F using Tapatalk
-
The Following 2 Users Say Thank You to rusty_nail For This Useful Post:
Maxhead (17th August 2018), mudski (18th August 2018)
-
17th August 2018, 09:04 AM
#8536
Legendary
From what I've heard the superior ones sound really good and control body roll heeeaps better than the factory items which leave a little to be desired especially when loaded and stuff on the roof. Reckon i might upgrade to these one day. .
Sent from my SM-G930F using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
rusty_nail (17th August 2018)
-
18th August 2018, 03:24 PM
#8537
Administrator
Put the new uhf antenna on lol
My god I can hear people and communicate!!!
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to AB For This Useful Post:
Rossco (18th August 2018), rusty_nail (18th August 2018)
-
18th August 2018, 03:38 PM
#8538
Legendary
Originally Posted by
AB
Put the new uhf antenna on lol
My god I can hear people and communicate!!!
Sent from my iPhone using Tapatalk
Yay, thank goodness . . .
Sent from my SM-G930F using Tapatalk
-
-
18th August 2018, 04:23 PM
#8539
What did you do to your Patrol today!
Originally Posted by
rusty_nail
Haven't done anything yet, but I'm planning on purchasing a sway bar from superior for the front end at bending the factory one several years ago and not being bothered to replace it. Has anyone had experience with it? Is it worth the money or should I just source a factory one. Currently running A4"lift with drop boxes.
Also noticed they sell genuine hubs (auto) for$160 a pair, my d/s hub is bugger so needing to look into replacing them. The are cheap Chinese manual ones (I'm keen to change to manual) but if decent manual hubs are really expensive then I'll probably just replace with the genuine ones.
Cheers
Rusty
Sent from my SM-G930F using Tapatalk
Dont buy the Chinese hubs Nic. I did that and the hubs were not locking in properly due to poor manufacturing. So I managed to get a refund on them and just bit the bullet and bought genuine ones. I have pics here somewhere showing the difference of the Chinese and oem ones.
Sent from my crapPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
rusty_nail (18th August 2018)
-
19th August 2018, 06:40 AM
#8540
Bitumen Burner
I'm in the process of doing a few things then detailing DX grunt, ready for sale, over the next month.
The missus can't ride in it due to a back injury and it saddens me to see it being used for tip runs and driven for the sake of keeping all things ticking over.
Winner of 'Best 4 x 4 ' at the 2017 Albany Agricultural Society Inc - Town n Country Ute Muster.
Ex Telstra - 2005, 4.2 TDi ute -with pod and more fruit than a grocery shop.
-
The Following User Says Thank You to DX grunt For This Useful Post:
katwoman (19th August 2018)