Tools you have bought/want to buy feedback thread

[10G]

Just be careful. The last thing you want to be doing is blasting a paper element with 100psi. Put a hole in the element and its a dusted engine you will have. A good tap on the ground and a light air dusting from the inside to out is best.

This ^^^ has just made think I may change to genuine air filters.

I recently bought a Repco oil filter, it was pretty average. I then bought a genuine Nissan oil filter, the quality is like chalk and cheese, but so were the prices. But you get what you pay for, so you can't really complain.

[10G]

Wrench turned up today, gotta be happy with that service, ordered on Thursday, turns up lunch time Monday in rural Vic.

Not opened it up yet, will later on.

Well used the 12v wrench/rattle gun thing the other day, it worked great, no problems. It has to build up a head a steam, it warms up, gives the nut a whack, then warms up again, another whack and so on, sort of strange I thought, but it does the job pretty well.

[10G]

Hey Cuppa, are those Jung pliers from Germany?

[mudski]

This ^^^ has just made think I may change to genuine air filters.

I recently bought a Repco oil filter, it was pretty average. I then bought a genuine Nissan oil filter, the quality is like chalk and cheese, but so were the prices. But you get what you pay for, so you can't really complain.

Donaldson do the best air filter on the market in my opinion. But yeah the OEM filter is better than Ryco.

[mudski]

Probably one of the most useful bit or kit I have. Used it heaps. Well worth the coin.
IMG_3165.jpg
IMG_3166.jpg


Sent from my iPhone using Tapatalk

[MudRunnerTD]

Yeah Tap and Die Set is great. I have a large kit o got off eBay. It has been great. The sizing has been a little off (size labels wrong ) but it has got the job done quite a few times.

[NissanGQ4.2]

I got nothing.... you guys suck!!!!!

[Winnie]

Probably one of the most useful bit or kit I have. Used it heaps. Well worth the coin.
IMG_3165.jpg
IMG_3166.jpg


Sent from my iPhone using Tapatalk

I don't use mine very often but it pays for itself every single time it gets used!

Sent from my SM-G986B using Tapatalk

[Brissieboy]

I have separate sets for metric (fine and coarse), imperial, UNF and BA - all collected over many years from various sources and all in use an various times.
It's great to be able to just grab what you need when you need it and not have to rely on someone else or dash off to the suppliers.

[pollenface]

Probably one of the most useful bit or kit I have. Used it heaps. Well worth the coin.

One of my bigger mistakes in life was getting a cheap, incomplete tap & die kit.