What did you do to your Patrol today!

[PeeBee]

Built a frig temp controller after failing to find one to buy, and it even works! Stuffed around with Pto pump hoses but still not installed due to wrong parts supply, dodged the wife and the ever present "to do list".

[Yeti's Beast]

Built a frig temp controller after failing to find one to buy, and it even works! Stuffed around with Pto pump hoses but still not installed due to wrong parts supply, dodged the wife and the ever present "to do list".

How did you make your controller?
I once read somewhere that if your Waeco fridge controller throws in the towel, then modify your fridge with one of these
https://www.ebay.com.au/itm/271956087435


Sent from my iPhone using Tapatalk Pro

[MB]

Had a ripper day too finally. No work, 14+ hours of me and me Trol time.
Strengthened the hubs to cope with front lockers. Strengthened the arse end with a new/better panhard. Beefed up the Drag Link. Installed a first line of defence cheaper than I could buy the steel for. Tie Rod received an upgrade too.
Working means to an end :-)


Sent from my iPhone using Tapatalk

[jay see]

Had a ripper day too finally. No work, 14+ hours of me and me Trol time.
Strengthened the hubs to cope with front lockers. Strengthened the arse end with a new/better panhard. Beefed up the Drag Link. Installed a first line of defence cheaper than I could buy the steel for. Tie Rod received an upgrade too.
Working means to an end :-)


Sent from my iPhone using Tapatalk

Nice work markie.

That reminds I've still got a adjustable draglink to fit thanks to Mudski.

Sent from my A1601 using Tapatalk

[PeeBee]

Finally stripped out my 3 gal alloy air tank, have a mate who will test it for me so thats peace of mind.
Ive been running this tank since about 1995. , it cant rust so thats good but my mate will do all the tests neccessary
so I'll know its safe. Originally I filled it via a $650 Big Balls 3/4hp compressor, but todays "Thumper" would out do it I think.
Along with another tank, dont know if I'll use it yet or not will run air tools, air horn and a front Pro-locker.
I think I have enough room to squeeeeeeze it underneath. 1995 they were only $40 from a place in Brisbane
doing street car suspension, My side tarp for my awning also arrived looks weatherproof to my eye.
Nearly time to go and get lost somewhere, .

Thanks for the 'jog' TD, as I lave a 4l reservoir and think I will use it to increase the holding capacity of oil in my hydraulic winch, since it's 100mm dia x 500mm long, should be able to squeeze it in somewhere, and it's stainless ax well.

[Rossco]

Had a ripper day too finally. No work, 14+ hours of me and me Trol time.



Sent from my iPhone using Tapatalk

Awsome Markie, she's really turning into a beast now. Is the winch up & running yet? ?



Sent from my GT-I9506 using Tapatalk

[Winnie]

Whoah full on Mark and ready for a nice test trip!
It's a bloody serious work/play best of both worlds rig you've got now.

Sent from my SM-G935F using Tapatalk

[Bacho86]

Awsome Markie, she's really turning into a beast now. Is the winch up & running yet? ?



Sent from my GT-I9506 using Tapatalk

I was going to ask the same question, looks like the winch drum is still empty?


Sent from my iPhone using Tapatalk

[MB]

Nearly there......:-)


Sent from my iPhone using Tapatalk

[Winnie]

Got the freespool working now too? Keen to see how the Iskra motor goes Mark!

Sent from my SM-G935F using Tapatalk