-
17th May 2017, 11:14 PM
#11
Patrol Guru
Originally Posted by
TPC
I can't understand how they can make them that cheap, I paid 5 times that price for my Black Widow drawers.
3 words
Made in China
and a few more for good measure bulk orders placed with the Chinese manufacturer
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-
-
17th May 2017 11:14 PM
# ADS
Circuit advertisement
-
17th May 2017, 11:27 PM
#12
Legendary
I got mine for $375, but no freebies. As for the install, pretty straight forward mate.
Just be prepared for a long wait after you order.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
18th May 2017, 02:03 PM
#13
Patrol Goddess
Originally Posted by
jay see
I got mine for $375, but no freebies. As for the install, pretty straight forward mate.
Just be prepared for a long wait after you order.
Sent from my A1601 using Tapatalk
And don't forget to remove the Jack before u Bolt in the side wings
Sent from my iPhone using Tapatalk
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
-
-
18th May 2017, 03:04 PM
#14
Legendary
Originally Posted by
katwoman
And don't forget to remove the Jack before u Bolt in the side wings
Sent from my iPhone using Tapatalk
Or the 3rd row seat belts.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
18th May 2017, 09:50 PM
#15
I have a set in my GU and a mate has a set in his GQ. They are really good value for money but:
* They weigh 85kgs which is seriously heavy
* The drawers only slide out about 80% of the way, they use roller bearings instead of drawer style runners
* The fridge slide only slides out about 80% of the way, and it can't be swapped to the right side
* Buy yourself a cordless screwdriver, there are literally hundreds of screws to do up
* They can be tricky fitting if you have a rear cargo barrier, consider getting some adhesive rubber strip to go between the drawers and the cargo barrier to prevent squeaking noises
* Be careful when fitting, they have really sharp edges
* The rear seat belts can be left in, the drawers go in around them. On the other hand, once fitted the seat belts are not much use
* I trimmed the metal around the jack cover so I can still access it
* FOLLOW THE INSTRUCTIONS CAREFULLY - I didn't and had to remove the tops to fit the drawer stoppers
* Use loktite on the screws, they seem to come loose easily
In spite of all the above, they are really good value for money
WARNING: Using a Tow Ball on any Snatch can KILL PEOPLE!
-
The Following 2 Users Say Thank You to JME_GU For This Useful Post:
GQtdauto (20th May 2017), katwoman (18th May 2017)
-
19th May 2017, 09:09 PM
#16
Hardcore
Thanks everyone. I will go and have a closer look at the display stock.
I have my rear electrics wired into where the wings go so will see if I can modify to enable me to still access this.
-