-
7th June 2016, 05:34 PM
#71
I'm not sure
Originally Posted by
nissannewby
Kw means nothing. It might have only had 650nm depending on the setup even 4.6s to drive the 37s. I would be looking for one that atleast holds 800nm.
I have that written down from our chat the other night. I still need to ring NPC & ask about their clutches. I'll ring UFI tonight and ask about theirs.
-
-
7th June 2016 05:34 PM
# ADS
Circuit advertisement
-
7th June 2016, 05:37 PM
#72
Patrol God
Originally Posted by
Chappy
I have that written down from our chat the other night. I still need to ring NPC & ask about their clutches. I'll ring UFI tonight and ask about theirs.
Npc viper will do 1000nm. Ufi say 800nm but the one in the test vehicle has help up at 1000+nm. If you go the npc just get the clutch and have your flywheel drilled to suit.
I will also highly recommend lightening the flywheel and have the clutch/flywheel assembly balanced. You will like the difference it makes and it also helps in preventing crank breakages.
-
-
7th June 2016, 05:37 PM
#73
Patrol God
4Terrain are great clutched from my research. They're only around the corner from me just off Settlement rd.
Heres mine sitting in the garage after Mudski didn't need it for his car.
Comes with an uber timber box, if that doesn't sell it, i don't know what will. lol
-
The Following User Says Thank You to Hodge For This Useful Post:
-
7th June 2016, 05:43 PM
#74
I'm not sure
Originally Posted by
nissannewby
Npc viper will do 1000nm. Ufi say 800nm but the one in the test vehicle has help up at 1000+nm. If you go the npc just get the clutch and have your flywheel drilled to suit.
I will also highly recommend lightening the flywheel and have the clutch/flywheel assembly balanced. You will like the difference it makes and it also helps in preventing crank breakages.
I asked JPC about lightening the flywheel and they suggested leaving it as it is, everything else I have heard and read suggests otherwise though. I'm not sure who else in Melbourne I can speak to about getting it all drilled and balanced.
-
-
7th June 2016, 05:46 PM
#75
Patrol God
Originally Posted by
Chappy
I asked JPC about lightening the flywheel and they suggested leaving it as it is, everything else I have heard and read suggests otherwise though. I'm not sure who else in Melbourne I can speak to about getting it all drilled and balanced.
Hence why I dont like them. Need to aim for 1.5 to 2kg of the original weight. Any engine builder/reconditioner should be able to do the drilling, lightening, balancing and facing.
-
The Following User Says Thank You to nissannewby For This Useful Post:
-
7th June 2016, 06:20 PM
#76
Administrator
Originally Posted by
Chappy
I asked JPC about lightening the flywheel and they suggested leaving it as it is, everything else I have heard and read suggests otherwise though. I'm not sure who else in Melbourne I can speak to about getting it all drilled and balanced.
Let's stay in contact Chappy as I'm looking at the same thing too except I won't be ready for a month or so $$$
-
-
7th June 2016, 07:02 PM
#77
I'm not sure
Originally Posted by
AB
Let's stay in contact Chappy as I'm looking at the same thing too except I won't be ready for a month or so $$$
No worries mate, sounds good. I'm wanting to get one done before the Licola trip, the boss will confirm tomorrow if I can have the time off or not.
I just got off the phone from Matt at UFI, $850 delivered for their clutch. Good for 1000nm. He said to have my flywheel machined & lightened by 2kg at least.
The workshop across from my work has quoted $700 to fit a clutch for me.
-
-
7th June 2016, 07:07 PM
#78
Administrator
Originally Posted by
Chappy
No worries mate, sounds good. I'm wanting to get one done before the Licola trip, the boss will confirm tomorrow if I can have the time off or not. I just got off the phone from Matt at UFI, $850 delivered for their clutch. Good for 1000nm. He said to have my flywheel machined & lightened by 2kg at least. The workshop across from my work has quoted $700 to fit a clutch for me.
Yep that's the same price I got too for the clutch from ufi.
Sounds like a winner!
-
-
7th June 2016, 07:30 PM
#79
Patrol God
Originally Posted by
Chappy
He said to have my flywheel machined & lightened by 2kg at least.
This thread has an echo....
-
The Following 4 Users Say Thank You to nissannewby For This Useful Post:
AB (7th June 2016), Chappy (7th June 2016), OldMav (7th June 2016), Winnie (7th June 2016)
-
7th June 2016, 08:02 PM
#80
I'm not sure
Originally Posted by
nissannewby
This thread has an echo....
There seems to be haha. Thanks for your help and wisdom once again. I'll hopefully order a UFI this week.
-