-
12th February 2019, 12:46 AM
#1
Discs for RB30 PATROL
Hey guys, just wondering what discs people recommend for a 3ltr patrol? Need to buy new ones and pads. Ive been told Bendix for pads ,but not sure on good discs for off road.
.
Thanks in advance
-
-
12th February 2019 12:46 AM
# ADS
Circuit advertisement
-
12th February 2019, 10:37 AM
#2
Patrol God
How much meat is left on your current ones? The front can be machined to a minimum 18 mm and the rear can be machined to a minimum thickness of 16 mm. It cost me $49 to get the two front discs on my Falcon machined.
Corrected brake disc thickness.
Last edited by mudnut; 16th February 2019 at 04:37 PM.
-
-
12th February 2019, 11:41 AM
#3
Not sure how much meat left on them. Wanted to get new ones anyway. Thinking of machining.
-
-
12th February 2019, 11:42 AM
#4
Not sure. Was planning on getting new ones anyway.
-
-
12th February 2019, 11:43 AM
#5
Sorry, didn't think 1st post worked
-
-
12th February 2019, 11:47 AM
#6
Patrol Freak
Originally Posted by
GQJay
Not sure how much meat left on them. Wanted to get new ones anyway. Thinking of machining.
Just last week put DBA slotted rotors on ex Repco. Invoice is at home, will think to let you know cost of tomorrow.
Used Bendix purple stripe pads, still bedding them in but definitely an improvement to stopping power.
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-
-
15th February 2019, 09:41 AM
#7
Patrol Freak
Finally remembered to dig out that invoice.
$203.00 per side plus "procurement recovery" (freight, you Repco wankers) of $30.00
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-
-
15th February 2019, 01:09 PM
#8
Been told not to use slotted rotors as stones can get caught in them? Heard of that ?
-
-
15th February 2019, 01:48 PM
#9
Patrol Freak
Can't say I have. I need the better stopping cos I drop a 600kg camper on it.
No stones in Qld anyhow, all golden beaches.
I AM NOT STUBBORN.........I prefer the term, Singlemindedly independent !
-
-
15th February 2019, 09:46 PM
#10
Thanks mate, I'll look into it
-