-
18th October 2016, 08:13 PM
#331
Dribble Master
Originally Posted by
Plasnart
The new donk doesn't have a dipstick??
It does but AB doesnt fit in that little hole
-
The Following 3 Users Say Thank You to Clunk For This Useful Post:
BigRAWesty (18th October 2016), Plasnart (18th October 2016), Touses (19th October 2016)
-
18th October 2016 08:13 PM
# ADS
Circuit advertisement
-
18th October 2016, 08:13 PM
#332
Breadmaker Shaker
Originally Posted by
AB
Are you coming?
Ho Ho Ho!! Comedian.
What is the charge? Eating a meal? A succulent Chinese meal??
-
-
18th October 2016, 08:27 PM
#333
Smart like tractor
Originally Posted by
AB
Thanks Benny, appreciate it!!
This weekend is cleaning up the block and bolting things on so I'll have a look.
You don't happen to have a vac pump to suit the td42t by chance or a dipstick...lol
Let me start to put things on and see what crops up.
I printed out all torque specs but I didn't find one for the pulley on the water pump?
Water pump retaining bolts 16-21Nm
Water pump retaining nuts 30-41Nm
Thermostat housing bolts 16-21Nm
I might have a spare vac pump with some T motor stuff I bought of Mat. If I don't have it Mat does. I also have the one off my motor, which is spare now anyway
What wrong with the silvertop dipstick
96 GQ coil/Cab
08 G6eT
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
MudRunnerTD (18th October 2016)
-
18th October 2016, 08:41 PM
#334
Administrator
Originally Posted by
Ben-e-boy
Water pump retaining bolts 16-21Nm Water pump retaining nuts 30-41Nm Thermostat housing bolts 16-21Nm I might have a spare vac pump with some T motor stuff I bought of Mat. If I don't have it Mat does. I also have the one off my motor, which is spare now anyway What wrong with the silvertop dipstick
Thanks mate, I mean the actual nuts that hold the pulley on.
The silver top is a lot shorter then this one but I can't even use my old holder because the min max line on the td42t is around 5mm difference either side of mine.
-
-
18th October 2016, 08:53 PM
#335
Smart like tractor
Originally Posted by
AB
Thanks mate, I mean the actual nuts that hold the pulley on.
The silver top is a lot shorter then this one but I can't even use my old holder because the min max line on the td42t is around 5mm difference either side of mine.
7-9 Nm for the nuts and fan bolts
96 GQ coil/Cab
08 G6eT
-
The Following 2 Users Say Thank You to Ben-e-boy For This Useful Post:
AB (18th October 2016), MudRunnerTD (18th October 2016)
-
18th October 2016, 09:02 PM
#336
Expert
Originally Posted by
AB
Thanks everyone and thanks Westy.
It's amazing how much extra things I now need as they crop up so again, very much appreciated but please, no more folks!
Hi everyone, I just got back from a trip to the Cape. That was awesome. But Sorry to hear about your engine problems AB. If you need more $$ then happy to contribute what I can.
Paul
-
The Following User Says Thank You to Patrol-Guy For This Useful Post:
MudRunnerTD (18th October 2016)
-
18th October 2016, 09:09 PM
#337
Administrator
Originally Posted by
Patrol-Guy
Hi everyone, I just got back from a trip to the Cape. That was awesome. But Sorry to hear about your engine problems AB. If you need more $$ then happy to contribute what I can. Paul
No stress mate, welcome back but thanks anyway!
-
-
18th October 2016, 09:09 PM
#338
Administrator
Originally Posted by
Ben-e-boy
7-9 Nm for the nuts and fan bolts
Cheers Benny!!
-
-
18th October 2016, 10:21 PM
#339
Patrol God
Originally Posted by
AB
Thanks everyone and thanks Westy.
It's amazing how much extra things I now need as they crop up so again, very much appreciated but please, no more folks!
Were all here to assist each other when and where we can, no matter the situation..
-
The Following 2 Users Say Thank You to BigRAWesty For This Useful Post:
macca (19th October 2016), Woof (18th October 2016)
-
18th October 2016, 11:00 PM
#340
Dribble Master
Originally Posted by
AB
Are you coming?
It's just the way he's sitting
-
The Following 3 Users Say Thank You to Clunk For This Useful Post:
BigRAWesty (19th October 2016), mudski (19th October 2016), rusty_nail (19th October 2016)