-
19th December 2016, 11:38 PM
#7121
Patrol Freak
Installed new 80 Ch GME uhf radio and antenna
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following User Says Thank You to Bacho86 For This Useful Post:
daggy (19th December 2016)
-
19th December 2016 11:38 PM
# ADS
Circuit advertisement
-
19th December 2016, 11:45 PM
#7122
Legendary
Is that all black above the spring, or is it just the way the pic was taken?
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
20th December 2016, 12:06 AM
#7123
Patrol Freak
Originally Posted by
jay see
Is that all black above the spring, or is it just the way the pic was taken?
The top whip section is black but there is a middle section above the spring that's silver -- pretty much sure they're are complete black options if you really wanted
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following User Says Thank You to Bacho86 For This Useful Post:
jay see (20th December 2016)
-
21st December 2016, 12:02 PM
#7124
Last night i finished a complete coolant system overhaul; drained coolant from the engine block as well as radiator. All new belts, new water pump, new fan, new hoses.... I was sorta dropping nuts before i turned it over thinking that i had forgotten to tighten things (even though i checked it 10 times); but it cranked over fine and just bled the system of air.
Was so psyched i chucked in new LED globes aswell my misso got me.... i know some people don't think they're great but i'll run em for a while and see what i think of them...
Big shout out to the guys on here who are always helping give tips or help when we get a bit stuck!
-
The Following User Says Thank You to ToddD42 For This Useful Post:
threedogs (21st December 2016)
-
21st December 2016, 02:39 PM
#7125
Patrol God
Originally Posted by
jay see
Is that all black above the spring, or is it just the way the pic was taken?
Good tip if you're running a light bar is mask off and spray all antenna matt black.
You would be surprised how much glare you get from white antennas
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
21st December 2016, 02:42 PM
#7126
Patrol God
Originally Posted by
ToddD42
Last night i finished a complete coolant system overhaul; drained coolant from the engine block as well as radiator. All new belts, new water pump, new fan, new hoses.... I was sorta dropping nuts before i turned it over thinking that i had forgotten to tighten things (even though i checked it 10 times); but it cranked over fine and just bled the system of air.
Was so psyched i chucked in new LED globes aswell my misso got me.... i know some people don't think they're great but i'll run em for a while and see what i think of them...
Big shout out to the guys on here who are always helping give tips or help when we get a bit stuck!
give us some feed back on your LED globes, are they the ones with a fan/motor on them?
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
21st December 2016, 05:58 PM
#7127
Expert
Originally Posted by
threedogs
Good tip if you're running a light bar is mask off and spray all antenna matt black.
You would be surprised how much glare you get from white antennas
I agree with you there from first hand experience. I taped mine up with black electrical tape.
-
The Following User Says Thank You to Rip'n'Shred For This Useful Post:
threedogs (21st December 2016)
-
21st December 2016, 06:14 PM
#7128
Patrol God
Originally Posted by
Rip'n'Shred
I agree with you there from first hand experience. I taped mine up with black electrical tape.
Even an alloy bull bar needs either black gaffer tape or carefully mask off
a section and spray matt black again
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
21st December 2016, 07:37 PM
#7129
-
-
21st December 2016, 07:58 PM
#7130
Did some wiring work, nothing caught fire, total success, did some welding on rear bar, all good, total success, replaced power steering pulley with a duplex for hydraulic winch drive - didn't break anything, total success - something has got to change as I'm not used to this!
-
The Following 4 Users Say Thank You to PeeBee For This Useful Post:
AB (21st December 2016), BigRAWesty (21st December 2016), Cuppa (22nd December 2016), Plasnart (22nd December 2016)