OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Engine Running Sense Wire???

  1. #1
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)

    Engine Running Sense Wire???

    I've picked up a DC-DC charger that uses a sense wire to tell it when the motor is running, so it will kick in and start charging.

    I'm hoping someone can tell me where I could connect this sense wire? I don't want to hook it up to any accessory wires as I don't want the charger to start up when I'm parked and listening to the radio for example, so it needs to be only when the engine is running.

    The charger and the battery it charges are both inside the vehicle, so if there's somewhere inside that'd be great.

    Thanks.
    ..

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #2
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,379
    Thanks
    12,163
    Thanked 13,452 Times in 6,588 Posts
    Mentioned
    324 Post(s)
    Tagged
    1 Thread(s)
    Hmmmm, @nissannewby i reckon this one is yours bud.. With the 24v system in my GQ i added an excite circuit using a halogen globe at teh dash. The globe lights when the ignition is on and when the engine starts excites the 24v alternator and the globe goes out.
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

  4. The Following User Says Thank You to MudRunnerTD For This Useful Post:

    10G (4th June 2021)

  5. #3
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Was thinking.

    In case this is easier, I've run a chunky 12v cable from the crank battery inside to the DC-DC charger.

    I could use a relay to activate that chunky cable, this way I could hook up a sense wire under the bonnet to the relay.

    But again, where from?
    ..

  6. #4
    Patrol Freak jff45's Avatar
    Join Date
    May 2012
    Location
    Morayfield, QLD
    Posts
    1,454
    Thanks
    423
    Thanked 1,058 Times in 613 Posts
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Most DC/DC chargers have their own inbuilt VSR (voltage sensitive relay) and only start charging around 13.3 then stop when feed drops to around 12.7.
    John

    2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body

  7. The Following 2 Users Say Thank You to jff45 For This Useful Post:

    10G (5th June 2021), MudRunnerTD (5th June 2021)

  8. #5
    Patrol God
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    6,600
    Thanks
    5,697
    Thanked 6,095 Times in 3,139 Posts
    Mentioned
    174 Post(s)
    Tagged
    1 Thread(s)
    What is this sense wire? Which DCDC unit is it?
    Most use ignition and/or voltage threshold of some kind , as John said to activate them selves...
    Ignition is easy to find depending on where you mount the unit.
    2005 TD42TI

  9. The Following User Says Thank You to Hodge For This Useful Post:

    10G (5th June 2021)

  10. #6
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    It's a Renogy DC-DC charger. The doco says it won't turn on until is gets a signal on its' sense wire, they just skimped on the circuitry other brands use I guess.

    I've been over the schematics and have found that I can get the signal from the wiper fuse as they have power when the ign key is in the 'On' spot. It's a hassle having to do this, but I guess that's why the charger was cheaper than alot of others.
    ..

  11. #7
    Patrol Freak jff45's Avatar
    Join Date
    May 2012
    Location
    Morayfield, QLD
    Posts
    1,454
    Thanks
    423
    Thanked 1,058 Times in 613 Posts
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    I just read a review on the Renogy that says it has an inbuilt VSR for vehicles that don’t have a smart alternator.
    John

    2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body

  12. The Following User Says Thank You to jff45 For This Useful Post:

    10G (6th June 2021)

  13. #8
    Patrol Freak jff45's Avatar
    Join Date
    May 2012
    Location
    Morayfield, QLD
    Posts
    1,454
    Thanks
    423
    Thanked 1,058 Times in 613 Posts
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by 10G View Post
    It's a Renogy DC-DC charger. The doco says it won't turn on until is gets a signal on its' sense wire, they just skimped on the circuitry other brands use I guess.

    I've been over the schematics and have found that I can get the signal from the wiper fuse as they have power when the ign key is in the 'On' spot. It's a hassle having to do this, but I guess that's why the charger was cheaper than alot of others.
    If it really needs a signal on that sense wire, you can simply connect it to the cable on the charger that comes from your main battery. That will be the same as sensing 12v from ignition.
    John

    2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body

  14. The Following User Says Thank You to jff45 For This Useful Post:

    10G (6th June 2021)

  15. #9
    Patrol Guru 0-TJ-0's Avatar
    Join Date
    Jan 2017
    Location
    South Australia
    Posts
    623
    Thanks
    572
    Thanked 396 Times in 256 Posts
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by jff45 View Post
    If it really needs a signal on that sense wire, you can simply connect it to the cable on the charger that comes from your main battery. That will be the same as sensing 12v from ignition.
    It will charge full time/even if the engine is stopped if you do that. My ctek has the same wire, apparently the smart alternators don't always reach the "on voltage" required to activate the charger so you need to connect that wire to a 12v ignition source. You can try it without it, my (Gu) alternator looks close to standard(non smart) voltages. I've never seen mine drop below 12.7 when running and usually hits 14.1 when first started.
    2003 GU TD42 with a few extra ponies

  16. The Following User Says Thank You to 0-TJ-0 For This Useful Post:

    10G (6th June 2021)

  17. #10
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Thanks everyone for the help.

    You're correct 0-TJ-0, that would charge all the time. I'm going to choose a place from within the fuse panel, the fuses are even marked (IGN) just to make a little easier.

    Thanks everyone for the help.
    ..

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •