Brake proportioning valve adjustment

[Robo]

Hi Robo, sorry I didnt get back to this thread until today, looking for answers to another problem. Yes I followed the destructions you wrote and set the spring half way between the recommended distance. Seems to be working fine.

That's cool, good to hear your a happy chappy.

[FrodeS]

Interesting. From what I read earlier, you are experiencing the opposite of what happens for most. That is, with less tension on the spring, the arm would be closer to the end screw, and from what I read earlier, should apply more rear brakes?

It's been a while.

I took the arm off, and realised it is slightly adjustable. One of the mounting holes are not completely round, but allow a bit of adjustment. I made the hole longer, making it more adjustable. This way, I was able to tighten the spring more, and got more brake power to the rear. Braking felt a lot better, but I still want to tighten it a bit more.

After slight modification: 2016-11-27 18.23.53.jpg

Original bracket : 2016-11-27 18.13.25.jpg

[Mitchell11]

thanks guys

Done a few K's on all sorts of terrain and alot happier wth the braking now.
I'm thinking I will leave it like this as it stops better on the black where a front would lock up.
The spot this happens is off camber down hill in the wet approaching a roundabout.
Scared the cactus out of me the first time it happened. Doesnt do it now.
Macca