-
30th December 2020, 01:22 PM
#611
The 747
Originally Posted by
Hodge
Am I seeing right ? You're running your winch with that cable on a 70A breaker ?
Sent from my Pixel 3a XL using Tapatalk
Nah you're not. The new winch cables are unprotected. It's the old cable going through the 70A breaker, the large cable would have been used to prevent voltage drop rather than carry a large load.
Sent from my SM-G986B using Tapatalk
-
-
30th December 2020 01:22 PM
# ADS
Circuit advertisement
-
30th December 2020, 05:36 PM
#612
Originally Posted by
Hodge
Am I seeing right ? You're running your winch with that cable on a 70A breaker ?
Sent from my Pixel 3a XL using Tapatalk
Nah mate. That’s the old winch cable going via the breaker for something else now.
Sent from my iPhone using Tapatalk
-
-
30th December 2020, 05:43 PM
#613
Legendary
I've got mine constant battery which is handy I reckon but both will work. .
Sent from my SM-G930F using Tapatalk
-
-
30th December 2020, 06:21 PM
#614
The 747
Originally Posted by
mudski
Nah mate. That’s the old winch cable going via the breaker for something else now.
Sent from my iPhone using Tapatalk
Is it for the stripper lights?
Sent from my SM-G986B using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
mudski (30th December 2020)
-
30th December 2020, 10:51 PM
#615
Originally Posted by
Winnie
Is it for the stripper lights?
Sent from my SM-G986B using Tapatalk
Not really sure what your aiming at there bud with that. Lol. But no it runs over to the aux batt side as I found with the ARB twin compressor wired into the aux battery the compressor was running slower even with engine running, the voltage would drop when running. Wired to the cranker the compressor ran a little faster and the voltage wouldn’t drop as much. Thinking the Ctek dc-dc charger was favouring the aux battery.
Sent from my iPhone using Tapatalk
-
-
3rd January 2021, 04:57 PM
#616
Finally finished the high mount. With many thanks to all who helped. Wound the rope on today. Probably could have gone a longer rope though.
IMG_3796.jpg
Sent from my iPhone using Tapatalk
-
The Following 4 Users Say Thank You to mudski For This Useful Post:
Avo (3rd January 2021), jay see (3rd January 2021), MB (3rd January 2021), Rossco (3rd January 2021)
-
3rd January 2021, 05:10 PM
#617
Legendary
Looks like you could've gone double, how much is on there.
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
3rd January 2021, 06:24 PM
#618
The 747
Originally Posted by
mudski
Finally finished the high mount. With many thanks to all who helped. Wound the rope on today. Probably could have gone a longer rope though.
IMG_3796.jpg
Sent from my iPhone using Tapatalk
That's a good amount, I wouldn't go a lot more than that. When you are doing a perfect controlled straight pull maybe but when does that ever happen?
Always underspool the winch drum for off centre winching, the tree is never directly in front and your rope will bunch to one side.
Sent from my SM-G986B using Tapatalk
-
The Following 5 Users Say Thank You to Winnie For This Useful Post:
jay see (3rd January 2021), MB (3rd January 2021), mudski (3rd January 2021), PeeBee (3rd January 2021), Rossco (3rd January 2021)
-
3rd January 2021, 06:56 PM
#619
Originally Posted by
jay see
Looks like you could've gone double, how much is on there.
Sent from my CPH1979 using Tapatalk
35m I got on there....
Sent from my iPhone using Tapatalk
-
The Following 3 Users Say Thank You to mudski For This Useful Post:
jay see (3rd January 2021), MB (3rd January 2021), Rossco (3rd January 2021)
-
3rd January 2021, 06:56 PM
#620
Originally Posted by
Winnie
That's a good amount, I wouldn't go a lot more than that. When you are doing a perfect controlled straight pull maybe but when does that ever happen?
Always underspool the winch drum for off centre winching, the tree is never directly in front and your rope will bunch to one side.
Sent from my SM-G986B using Tapatalk
Yeah good point. Didn’t think of that. Thanks.
Sent from my iPhone using Tapatalk
-