Nissheads new D-Max

[Winnie]

Who cares about legalities... You know the car is good for it.

Sent from my SM-G935F using Tapatalk

[threedogs]

Well done a 4x4 is a 4x4 some just scrape and bump a bit
more to get to the top, Must be good of fuel well done again

[Clunk]

Who cares about legalities... You know the car is good for it.

Sent from my SM-G935F using Tapatalk

Meeeee, I care


Might have to get a wheelie bar for it

[Maxhead]

Meeeee, I care


Might have to get a wheelie bar for it

Lol... wheelie bar! Just measured it and the tray ends only 500mm from the end of the chassis

EDIT: and I got the certificate to say it meets Aus standards







................on the road

[Maxhead]

And are they rivets holding the lock on the trundle?

Yep sure are, I have two reasons why they are rivets but I will await your "expert" opinion to tell me why It shouldn't be like that Toddy








................on the road

[NissanGQ4.2]

Yep sure are, I have two reasons why they are rivets but I will await your "expert" opinion to tell me why It shouldn't be like that Toddy








................on the road

I don't have an expert opinion, I was just curious as 2 why they used rivets

[Maxhead]

I don't have an expert opinion, I was just curious as 2 why they used rivets

....and your opinion on shit welds?







................on the road

[NissanGQ4.2]

....and your opinion on shit welds?





................on the road

Their shit welds are still better than my shit welds, I'd blow a big hole in it

[Winnie]

I'm no expert but the welds look alright to me...
Like the look of those latches on the boards too, heaps better than the old turn style ones that always jam up.

Sent from my SM-G935F using Tapatalk

[Maxhead]

Let me put it this way. I rang around 15 dealers around NSW. Everyone of those suggested only 3 tray manufactures , being Wagga, Bega and Young to be the best trays in NSW
Obvioisly I opted with Bega as its close to my place down the coast and I have actually seen and touched these.
Peter Moore does all far south coast and snowy mountains councils so that would have to say something for the name., and if his quality was no good he wouldn't be in business
He only uses Australian steel and would not touch other crap. I have heard this from a lot of reputable buyers like Snowy Mountains Scheme.

If you really want to pick the quality of the welds Todd, maybe show us what you have made








...........on the road