-
28th July 2020, 01:24 PM
#14671
Legendary
Just finished lunch and it's half way through the week for me.
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
MB (28th July 2020), rusty_nail (28th July 2020)
-
28th July 2020 01:24 PM
# ADS
Circuit advertisement
-
30th July 2020, 10:53 AM
#14672
Was just about to rouse one of the mighty admins here to see if they could look into seeing why I wasn't receiving new post notifications, when lo & beer hold, I get notifications in my inbox.
-
-
30th July 2020, 11:07 AM
#14673
wore a mask yesterday, first time.
started off feeling self concious, then as I came across mask wearers, I started looking at non mask wearers and thinking, where's your mask you rotten sod.
it certainly kept my nose warm.
-
The Following 3 Users Say Thank You to 10G For This Useful Post:
Bidja (1st August 2020), Cremulator (31st July 2020), Rossco (30th July 2020)
-
30th July 2020, 11:17 AM
#14674
The 747
Originally Posted by
10G
wore a mask yesterday, first time.
started off feeling self concious, then as I came across mask wearers, I started looking at non mask wearers and thinking, where's your mask you rotten sod.
it certainly kept my nose warm.
I wore one for the first time on Monday, hated it and it was far more restrictive than I was expecting.
Just one of those things though that we have to do, and the more people do it, the shorter the period we will have to put up with it.
Sent from my SM-G986B using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
Cremulator (31st July 2020)
-
30th July 2020, 06:35 PM
#14675
The Mask is nothing, should try wearing a Hazmat Suit just to assist Ambulance Paramedic's to load a Patient into their Ambulance unit . . . 2 or 3 times a shift . . . I'd take a Mask by itself any day.
Grant
Penrith Region
Sydney NSW.
-
The Following 8 Users Say Thank You to Grant209 For This Useful Post:
10G (31st July 2020), Bidja (1st August 2020), Cremulator (31st July 2020), jack (30th July 2020), MB (1st August 2020), Rossco (30th July 2020), rusty_nail (30th July 2020), Winnie (30th July 2020)
-
1st August 2020, 05:20 PM
#14676
Daily Lurker
-
The Following 12 Users Say Thank You to rusty_nail For This Useful Post:
0-TJ-0 (1st August 2020), 10G (2nd August 2020), Clunk (6th August 2020), Cremulator (2nd August 2020), jack (1st August 2020), MB (2nd August 2020), mudnut (1st August 2020), mudski (1st August 2020), pearcey (2nd August 2020), PeeBee (1st August 2020), Rossco (1st August 2020), Touses (3rd August 2020)
-
4th August 2020, 11:58 PM
#14677
Breadmaker Shaker
In 1996 I walked out of Darwin cinema mid Escape From LA because it was soooo bad. Today I got no internet so watched TV and this movie was on.
I took it as a challenge. Got 40 minutes into it and then got internet back.
Thank FARRRRK coz that movie aint got no better over time. What a catastrophe of a flick.
-
The Following 2 Users Say Thank You to Plasnart For This Useful Post:
Cremulator (5th August 2020), MB (5th August 2020)
-
5th August 2020, 01:09 PM
#14678
beer was a buck cheaper in the town I was in, so out comes the wallet.
-
-
6th August 2020, 12:17 AM
#14679
Patrol God
Originally Posted by
10G
Been working with a guy to make an adaptor so I can put a Safari style snorkel head on the TJM Airtec snorkels.
Aadptor arrived yesterday, so I fitted it all up.
Attachment 81529
Attachment 81530
Need to a little bit of tidying up and maybe a few minor alterations to it, but it's turned out pretty good for a first print.
3D printed out of ABS plastic stuff.
Looks pretty good.
-
The Following 2 Users Say Thank You to mudnut For This Useful Post:
10G (6th August 2020), Avo (9th August 2020)
-
6th August 2020, 09:58 AM
#14680
Originally Posted by
mudnut
Looks pretty good.
Thanks Craig. It's ended up being a good fit, I'm happy with it.
-