-
6th October 2020, 10:04 PM
#511
Patrol God
Hopefully the injectors reset will help out. I recall you talking to me about it agess ago.
Also as for the thermostats... MB' thread here might give you some info.
http://www.nissanpatrol.com.au/forum...er-Thermostats
-
-
6th October 2020 10:04 PM
# ADS
Circuit advertisement
-
6th October 2020, 10:17 PM
#512
Originally Posted by
Hodge
Yeah Im looking at the total length of the stat more than the temp ratings. Trying to get the stat by pass to shut earlier to force coolant to flow through the radiator earlier and at a lower coolant temp. I have read some have even welded in spacer plates so the by pass on a OEM stat will shut earlier and had good success. I think using a different stat is easier.
But we'll see what happens with the new squirters first....
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
10G (7th October 2020), MB (7th October 2020)
-
7th October 2020, 09:07 PM
#513
.........
-
The Following User Says Thank You to MB For This Useful Post:
mudski (7th October 2020)
-
7th October 2020, 09:18 PM
#514
So I’ve got the squirters in. 47nm torque really feels to light but...
I’ve a got a longer stat to play with and I bought some water wetter. Hear d a lot of good words about this stuff.
What do I have to lose? Really?
IMG_3531.jpg
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
-
7th October 2020, 09:41 PM
#515
-
The Following User Says Thank You to MB For This Useful Post:
mudski (8th October 2020)
-
7th October 2020, 09:53 PM
#516
So I got the injectors in. Then stopped. There’s a lot a corrosion in the inside on two of the banjos only the spill tube.
IMG_3533.jpg
Kinda hard to see in the pic but these two are quite corroded, the rest were squeaky clean. I’m gonna ask the guy who did my injectors tomorrow for some input.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to mudski For This Useful Post:
mudnut (7th October 2020)
-
7th October 2020, 09:57 PM
#517
Mudski GU Build Thread
IMG_3532.jpg
Here’s the height difference between an OEM stat and the new one. I just need to pull back the lower by pass plate 3-4mm first.
Sent from my iPhone using Tapatalk
Last edited by mudski; 7th October 2020 at 10:15 PM.
-
The Following 2 Users Say Thank You to mudski For This Useful Post:
jay see (9th October 2020), mudnut (7th October 2020)
-
8th October 2020, 09:21 AM
#518
I am hopping this works ...
-
The Following User Says Thank You to Tip12345 For This Useful Post:
mudski (8th October 2020)
-
8th October 2020, 12:45 PM
#519
@MB, I wonder if we could buy something like this for the Chev's? @mudski, could you supply the part number and the overall height dimension pls so I can check it? Thanks
-
-
8th October 2020, 02:11 PM
#520
Originally Posted by
PeeBee
@MB, I wonder if we could buy something like this for the Chev's? @
mudski, could you supply the part number and the overall height dimension pls so I can check it? Thanks
DT79A Dayco.
SPECS
Flange diameter: 54mm
Height: 62mm
Flange to base: 40mm
Vent valve: 29mm
Celsius: 82°C
Fahrenheit: 180°F
-
The Following User Says Thank You to mudski For This Useful Post:
PeeBee (8th October 2020)