-
23rd June 2017, 01:43 PM
#31
Nice glove box @Cuppa. Where you buy that from?
-
-
23rd June 2017 01:43 PM
# ADS
Circuit advertisement
-
23rd June 2017, 02:27 PM
#32
Travelling Podologist
Originally Posted by
mudski
Nice glove box @
Cuppa. Where you buy that from?
Not sure, it was either the Cuppski Corporation or the Mudpa Association. 
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
A Nomadic Life (Blog)
-
-
23rd June 2017, 02:33 PM
#33
Originally Posted by
Cuppa
Not sure, it was either the Cuppski Corporation or the Mudpa Association.
I like the sound of Cuppski Corp. I will look them up.
-
-
23rd June 2017, 04:45 PM
#34
Expert
Originally Posted by
Cuppa
Thanks Mark & Mike, have just ordered one from my local Jaycar outlet.
New model - will take 3 days to get it in. Comes with panel & surface mount & looks like it should fit the same as the existing one.
Older model with same 4.2a output is on special at the moment, but I wasn't sure if it had the same mount as my existing one - so paid a bit more for the new one which does. Probably a good buy for anyone who doesn't need the extra 'plastic surround' though.
Photo of my existing one, just 'cos I'm not sure which is the 'Panel' mount, & which is the 'Surface' mount, although I'm guessing mine is 'Panel'.
Attachment 72251
Both "should" fit your existing panel by the looks of it. Same screw type mount on the back judging by the pics.
I had the older type which works well. Stuck it in the back for the 3rd row seat.
The other ones i have are the carling switch lookalike ones which are mounted where the rear ash tray used to be. Both types work well imo
Sent from my SM-G920I using Tapatalk
-
Posting Permissions
Reply With Quote