OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 3 of 64 FirstFirst 123451353 ... LastLast
Results 21 to 30 of 634

Thread: Turbo Upgrades for the GUIV TD42Ti

  1. #21
    Patrol God
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    6,600
    Thanks
    5,697
    Thanked 6,095 Times in 3,139 Posts
    Mentioned
    174 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by MudRunnerTD View Post
    @Hodge do you have a bigger Turbo on yours mate?
    Hey Daz.
    No mate. The only upgrades I have are the CC intercooler/scoop and a JPC high flow water pump all with a good tune.
    But,as per my previous post I am watching the thread with much interest!

    Also, I will add, the CC intercooler tamed the EGT's big time and gained a couple of ponies with it too. Pricey, but good investment.

    Have you also considered a bigger air intake ?
    2005 TD42TI

  2. The Following User Says Thank You to Hodge For This Useful Post:

    MudRunnerTD (1st November 2016)

  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  4. #22
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,379
    Thanks
    12,163
    Thanked 13,452 Times in 6,588 Posts
    Mentioned
    324 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by Hodge View Post
    Hey Daz.
    No mate. The only upgrades I have are the CC intercooler/scoop and a JPC high flow water pump all with a good tune.
    But,as per my previous post I am watching the thread with much interest!

    Also, I will add, the CC intercooler tamed the EGT's big time and gained a couple of ponies with it too. Pricey, but good investment.

    Have you also considered a bigger air intake ?
    Hi mate, no I haven't considered intake mods really. I have a billet air box lid with a cobra head which I got off @Stropp when he upgraded his airbox. Stropp did you do your airbox upgrade as a stand alone mod? Did you notice a huge change? What snorkel have you got feeding it?

    Eric what sort of power did you make with your tune?
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

  5. #23
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,379
    Thanks
    12,163
    Thanked 13,452 Times in 6,588 Posts
    Mentioned
    324 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by AB View Post
    I think a bit over 2k for the BW Dazz plus a couple or more hundred for t5 adaptor, larger actuator, short bracket and other goodies so more on the 2.5k mark.
    Can you help me with a parts list and where to get all that mate. When the time comes I need to not loose any time parked up as it's the Daily for Naomi and I can afford to not have everything I need to bolt up and go.
    Last edited by MudRunnerTD; 1st November 2016 at 09:38 AM.
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

  6. #24
    Patrol Guru Kimbo63's Avatar
    Join Date
    Dec 2015
    Location
    Perth WA
    Posts
    544
    Thanks
    939
    Thanked 585 Times in 262 Posts
    Mentioned
    5 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by MB View Post
    PM already sent for 4.3s possible off mate Daz!
    Hi daz my diff / diff gears are of my 2.8 litre and are 4.625:1 the 4.375:1 gears you are after are from the 3 litre autos
    Cheers Kimbo
    98 GU ST wagon 6.5TD chev 5 speed manual dual batteries storage drawers big red air compressor 9L tank millweld front and rear bars millweld 4" snorkel 4" air box 3" tough dog suspension lift drop box and hybrid radius arms 12000Lb winch ARB front air locker Alpine MP3 player amp and a good set of speakers GME 2 way The list goes on

  7. The Following User Says Thank You to Kimbo63 For This Useful Post:

    MudRunnerTD (1st November 2016)

  8. #25
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,379
    Thanks
    12,163
    Thanked 13,452 Times in 6,588 Posts
    Mentioned
    324 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by Kimbo63 View Post
    Hi daz my diff / diff gears are of my 2.8 litre and are 4.625:1 the 4.375:1 gears you are after are from the 3 litre autos
    Cheers Kimbo
    Thanks Kimbo. You should get good coin for the 4.6s mate, everyone wants them.
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

  9. The Following User Says Thank You to MudRunnerTD For This Useful Post:

    Kimbo63 (1st November 2016)

  10. #26
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,054
    Thanks
    13,546
    Thanked 20,715 Times in 8,559 Posts
    Mentioned
    579 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by MudRunnerTD View Post
    Can you help me with a parts list and where to get all that mate. When the time comes I need to not loose any time parked up as it's the Daily for Naomi and I can afford to not have everything I need to bolt up and go.
    Sure no probs

  11. #27
    Patrol God
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    6,600
    Thanks
    5,697
    Thanked 6,095 Times in 3,139 Posts
    Mentioned
    174 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by MudRunnerTD View Post
    Eric what sort of power did you make with your tune?
    I went up from 75kW to about 100kW with just a tune after fitting a 3" exhaust.
    Then after fitting the CC intercooler they easily reached 115-120kW, but apparently the car was gasping for air at that stage or beyond.
    The standard HT18 was at its peak range so they suggested if I want more, I'd need a better turbo and/or open up the air intake.
    The IP was also a limiting factor.

    2005 TD42TI

  12. The Following User Says Thank You to Hodge For This Useful Post:

    MudRunnerTD (1st November 2016)

  13. #28
    The 747 Winnie's Avatar
    Join Date
    Dec 2011
    Location
    Gippsland, VIC
    Posts
    15,810
    Thanks
    7,269
    Thanked 12,385 Times in 6,249 Posts
    Mentioned
    201 Post(s)
    Tagged
    1 Thread(s)
    When you do this work Darren I would suggest to take it to diesel tech for a tune up. I don't think the tune you had was very good.

  14. The Following User Says Thank You to Winnie For This Useful Post:

    MudRunnerTD (1st November 2016)

  15. #29
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,054
    Thanks
    13,546
    Thanked 20,715 Times in 8,559 Posts
    Mentioned
    579 Post(s)
    Tagged
    1 Thread(s)

  16. The Following 2 Users Say Thank You to AB For This Useful Post:

    Hodge (1st November 2016), MudRunnerTD (1st November 2016)

  17. #30
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,054
    Thanks
    13,546
    Thanked 20,715 Times in 8,559 Posts
    Mentioned
    579 Post(s)
    Tagged
    1 Thread(s)
    Just make sure you get 38mm bolt spacing for the oil drain and gasket.

    I think I also have a set of M8 x 1.25 studs too.

    Then Pirtek is your new friend in plumbing it up and I can help you there too with exact fittings and lengths, etc.

  18. The Following User Says Thank You to AB For This Useful Post:

    MudRunnerTD (1st November 2016)

Page 3 of 64 FirstFirst 123451353 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •