What did you buy today

**GQtdauto** · 14th February 2017, 03:30 PM

Bought a Ford AU cargo barrier for the GQ for $70 , the fit I thought would be a bit of mucking around but because it was cheap and I can weld thought what the hey .
The fit is better than I thought perfect at the top , same profile roof , only need to make up top brackets as bottom can fix onto rear of drawers , will take some pics of before and after just in case anyone else is interested .

**NissanPatrol.com.au** · 14th February 2017 03:30 PM

**Winnie** · 14th February 2017, 06:27 PM

And the leafblower! @rustynail @MudRunnerTD @Rossco hahaha

**MudRunnerTD** · 14th February 2017, 07:33 PM

Originally Posted by Winnie

And the leafblower! @rustynail @MudRunnerTD @Rossco hahaha

Nice one mate. Good kit. Is it the Brushless kit?

I picked up the blower last weekend! Winner

**Winnie** · 14th February 2017, 07:36 PM

Originally Posted by MudRunnerTD

Nice one mate. Good kit. Is it the Brushless kit?

I picked up the blower last weekend! Winner

Nah it's not brush less and it's the smaller drill too. $400 for the kit though it was cheap as!

**MudRunnerTD** · 14th February 2017, 11:33 PM

Originally Posted by Winnie

Nah it's not brush less and it's the smaller drill too. $400 for the kit though it was cheap as!

Good price mate and a good kit. I have that drill and driver and both have some plenty of work.

**rusty00** · 15th February 2017, 06:18 PM

Originally Posted by GQtdauto

Bought a Ford AU cargo barrier for the GQ for $70 , the fit I thought would be a bit of mucking around but because it was cheap and I can weld thought what the hey .
The fit is better than I thought perfect at the top , same profile roof , only need to make up top brackets as bottom can fix onto rear of drawers , will take some pics of before and after just in case anyone else is interested .

It have the same setup.
Fits perfectly and total cost was $9.50 bloody bargain

**GQtdauto** · 15th February 2017, 09:17 PM

Yeah it's amazing how good the fit is , I used the top brackets in the seatbelt mounts marked them and cut them , tack welded them and put the barrier back in adjusted the fit , removed welded the brackets on and only paint I had was black so touched up the welds with black .
Retried for fit and now I can't get the barstard back out , might have made it a bit too snug a fit .

**Yeti's Beast** · 15th February 2017, 10:03 PM

Scored these lil beauties from a customer today. Even comes with a blue tooth mic thingymajiggy

Sent from my iPhone using Tapatalk

**threedogs** · 16th February 2017, 09:50 AM

@Yetisbeast having blue tooth does that mean the sound "could" now come out of your Double Din radio head set.
I was thinking of this blue tooth UHF years ago and now its finally here, might have to look into it a bit more

**Yeti's Beast** · 16th February 2017, 11:04 AM

Originally Posted by threedogs

@Yetisbeast having blue tooth does that mean the sound "could" now come out of your Double Din radio head set.
I was thinking of this blue tooth UHF years ago and now its finally here, might have to look into it a bit more

Howdy
From what I read it can work with a Uniden hands free phone car kit
The mic I was given comes with a blue tooth controller that clips to your shirt and you plug a head phone with built in mic so you can be away from the car and still use the UHF.
It also says there is an optional Bluetooth earpiece like we use on our phones
The instructions are very basic so I will have to have a play and see if it could be paired to my cars radio

Sent from my iPhone using Tapatalk

User Tag List

Thread: What did you buy today

Thread Tools

Display

The Following 2 Users Say Thank You to GQtdauto For This Useful Post:

The Following 2 Users Say Thank You to Winnie For This Useful Post:

The Following User Says Thank You to Winnie For This Useful Post:

The Following User Says Thank You to rusty00 For This Useful Post:

The Following 2 Users Say Thank You to Yeti's Beast For This Useful Post:

Posting Permissions