-
24th December 2018, 09:15 PM
#1
Central locking
Having problems with the central locking, buttons were not working so trying to retro fit a Steel Mate 386M system (bought from Jaycar). Trying to find out what wiring is in the drivers door that locks and unlocks all the doors. We have power we have earth, we have the wire from the original wiring that locks but when we hook it up to new wires it wont stay locked. None of these wires will unlock or lock the drivers door. Does anyone know what wires from the original Nissan factory unit operate the master actuator in the drivers door. We have tried all the wires in the original wiring harness and none seem to work the drivers door.
-
-
24th December 2018 09:15 PM
# ADS
Circuit advertisement
-
24th December 2018, 09:53 PM
#2
Nasty Dog - Moderator
Not a real good introduction mate, maybe a Hi all and thanks may get you some assistance
If any members require assistance in anything regarding this forum, just let me know via a PM and I will help you in any way that I can.
-
The Following User Says Thank You to Woof For This Useful Post:
mudski (25th December 2018)
-
25th December 2018, 04:20 PM
#3
Expert
Gq or gu?
If it's a gq the drivers door only locks manualy,it just controls the other doors
-
-
16th January 2019, 05:08 PM
#4
Patrol Guru
Originally Posted by
Deano2506
Gq or gu?
If it's a gq the drivers door only locks manualy,it just controls the other doors
Second this. What model? Just did mine in a GU and works fine.
-