-
2nd July 2017, 09:55 PM
#211
Legendary
No idea still sussing out which motor LBZ etc and which box , Allison have some problems I hear .
-
-
2nd July 2017 09:55 PM
# ADS
Circuit advertisement
-
2nd July 2017, 10:37 PM
#212
-
-
3rd July 2017, 06:36 AM
#213
Legendary
Originally Posted by
PeeBee
Rossco, pls check PM
Cheers Phil, silly tapa. .
Sent from my SM-T800 using Tapatalk
-
-
4th July 2017, 10:51 PM
#214
-
The Following 5 Users Say Thank You to Rossco For This Useful Post:
GQtdauto (4th July 2017), MB (5th July 2017), MudRunnerTD (5th July 2017), mudski (5th July 2017), Winnie (5th July 2017)
-
4th July 2017, 10:54 PM
#215
Legendary
Have a feeling mine need changing Rossco , are they buggers to do .
-
-
4th July 2017, 11:02 PM
#216
Legendary
Originally Posted by
GQtdauto
Have a feeling mine need changing Rossco , are they buggers to do .
They're not too bad, probably take half a day i recon. Just gotta watch the rear ones, they're captive in the body and loctited in, if they break free & start spinning need to butcher the floor to get them out. A bit of a pre soak & heat 4 sure to get them out.
Sent from my GT-I9506 using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
7th July 2017, 07:40 AM
#217
Legendary
Barn doors are ready, drop those of today and grab the other 2 doors. .
Yay no more body work to prep, just need to get the guard done again i scratched. 😕
Also picked up the speedo from patrolapart which they fixed as it started to do the spin up to 180 then go back down randomly thing just before it was off the road. May as well fix it now. . .
Question; seem to remember someone on here doing a thread on adjusting the reading by turning a variable resistor on the speedo somewhere, just wondering if this will work. . . Don't want to bugger it without knowing what I'm doing. . .
Sent from my GT-I9506 using Tapatalk
-
-
7th July 2017, 09:14 AM
#218
..........
Originally Posted by
Rossco
Also picked up the speedo from patrolapart which they fixed as it started to do the spin up to 180 then go back down randomly thing just before it was off the road. May as well fix it now. . .
Question; seem to remember someone on here doing a thread on adjusting the reading by turning a variable resistor on the speedo somewhere, just wondering if this will work. . . Don't want to bugger it without knowing what I'm doing. . .
Sent from my GT-I9506 using Tapatalk
@mudnut, is this something you would know about?
-
-
7th July 2017, 09:50 AM
#219
Legendary
I remember the thread but thought it only fixed the speedo being out not being erratic .
-
-
7th July 2017, 05:12 PM
#220
Patrol God
They prolly replaced the crystal as it is a known problem, that the components legs corrode.
My advice is: not to follow my advice.
-